Programming additional remote head keys PX1/T6
Posted: Wed Jul 22, 2020 5:01 pm
Hi all, With the help of Stewart's post and a bit of trail and error: how to program PX1/T6 remote head keys.
Also, I copied Stewart's post and just modified the steps.
Require 2 original keys.
Lay your 2 original remote head keys and new key on the passenger seat.
Sit in drivers seat and door CLOSED.
1. Insert first original key, turn to on, wait until the immobilizer light goes out on the right hand side of the cluster, turn off and remove key.
2. Immediately Insert second original key, turn to on, wait until the immobilizer light goes out on the right hand side of the cluster, turn off and remove key.
3. Insert third new key, turn on, wait approx 5 seconds, instrument cluster will chime and new key programmed.
When completed your new key will start your PX1/T6 and remote lock/unlock works.
As Stewart mentioned : "If you have one or no original keys then it is Ford or an appropriate locksmith"
Also, I copied Stewart's post and just modified the steps.
Require 2 original keys.
Lay your 2 original remote head keys and new key on the passenger seat.
Sit in drivers seat and door CLOSED.
1. Insert first original key, turn to on, wait until the immobilizer light goes out on the right hand side of the cluster, turn off and remove key.
2. Immediately Insert second original key, turn to on, wait until the immobilizer light goes out on the right hand side of the cluster, turn off and remove key.
3. Insert third new key, turn on, wait approx 5 seconds, instrument cluster will chime and new key programmed.
When completed your new key will start your PX1/T6 and remote lock/unlock works.
As Stewart mentioned : "If you have one or no original keys then it is Ford or an appropriate locksmith"