Something else that was never enabled by default.
Thus will give you an additional menu in the settings/vehicle/locks menu.
For those that have canopies with central locking, this will stop the car re-locking and avoid the problem of locked keys inside the cargo area.
IPC
Non stop start vehicles
720-01-01 xxxx-5xxx-xxxx
Auto Stop start vehicles
720-01-01 xxxx-7xxx-xxxx
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Auto Relock after 60 seconds Disable
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 31
- Joined: Wed Aug 07, 2019 3:19 pm
- Location: SA
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2019
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 4 times
- Been thanked: 7 times
Having trouble with this one on a PX3 XLT 2.0. I twiddled the bit from 3 to 7, turned car off/on.
In the locks menu I see these options:
* Auto unlock
* Mislock
Unlocking -> All doors / Drivers door
* Switches inhibit
None of these appear to control the auto-relock after 30s or so. I've tried changing the state of all of them and nothing makes this auto-relock behaviour go away. I have a centrally locked canopy and tailgate so keen to stop this to avoid the obvious accident which is sure to happen at the worst possible time one day.
In the locks menu I see these options:
* Auto unlock
* Mislock
Unlocking -> All doors / Drivers door
* Switches inhibit
None of these appear to control the auto-relock after 30s or so. I've tried changing the state of all of them and nothing makes this auto-relock behaviour go away. I have a centrally locked canopy and tailgate so keen to stop this to avoid the obvious accident which is sure to happen at the worst possible time one day.
Blue, Shiny, and stock biturbo
-
- Junior Member
- Posts: 31
- Joined: Wed Aug 07, 2019 3:19 pm
- Location: SA
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2019
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 4 times
- Been thanked: 7 times
I changed the 7 back to a 3, restarted the car and it hasn't made any difference to that menu at all. Has anyone got this to work on PX3?
Blue, Shiny, and stock biturbo
-
- Junior Member
- Posts: 11
- Joined: Wed Nov 21, 2018 1:18 pm
- Location: Esperance
- Model Of Vehicle: RANGER XLS PX3
- Year Of Vehicle: 2019
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 7 times
Auto stop start is only manuals correct .? So having an auto I should use non stop start .
No such thing as a stupid question... so there’s no need for stupid answers..
-
- Junior Member
- Posts: 31
- Joined: Wed Aug 07, 2019 3:19 pm
- Location: SA
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2019
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 4 times
- Been thanked: 7 times
The modern autos are stop-start, at least the 2.0l is. You'll know if the engine turns itself off at lights.
Alternatively, if the digit is 3 then change to 7 or if 1 then change to 5.
Except it doesn't work for me on XLT 2.0. Seems to have worked for RossPat on PX2 above.
Alternatively, if the digit is 3 then change to 7 or if 1 then change to 5.
Except it doesn't work for me on XLT 2.0. Seems to have worked for RossPat on PX2 above.
Blue, Shiny, and stock biturbo
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Have just checked my PX3 cluster and no it does not support the menu.
The assumption is that if the proxy key is still in the vicinity of the vehicle then it would not re lock anyway.
The assumption is that if the proxy key is still in the vicinity of the vehicle then it would not re lock anyway.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 31
- Joined: Wed Aug 07, 2019 3:19 pm
- Location: SA
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2019
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 4 times
- Been thanked: 7 times
Alas that doesn't work if the keys are in the tub. Already locked in the canopy once, luckily was at home so the other set was to hand! Bit unfortunate this but thanks for your help.
Blue, Shiny, and stock biturbo
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Ok, try this. It will not give you the menu but should set the default option on ignition cycle as disabled.
I would make the change. Shut everything down, lock, unlock, shutdown, lock. Then press the unlock button and see if it stays unlocked.
726-21-01 from xxxx-x1xx-xxxx to xxxx-x0xx-xxxx
and possibly but probably not required so try the above only first.
726-15-02 from 0101-0101-01xx to 0202-0202-02xx
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 31
- Joined: Wed Aug 07, 2019 3:19 pm
- Location: SA
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2019
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 4 times
- Been thanked: 7 times
I can confirm that this does work to disable auto-relock on a PX3, but both changes are required, just the first one by itself had no apparent effect. I also timed the auto-relock and it's 45 seconds.saeb wrote: ↑Mon Aug 12, 2019 7:24 pm Ok, try this. It will not give you the menu but should set the default option on ignition cycle as disabled.
I would make the change. Shut everything down, lock, unlock, shutdown, lock. Then press the unlock button and see if it stays unlocked.
726-21-01 from xxxx-x1xx-xxxx to xxxx-x0xx-xxxx
and possibly but probably not required so try the above only first.
726-15-02 from 0101-0101-01xx to 0202-0202-02xx
Thank you so much for your help!
Blue, Shiny, and stock biturbo
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Great to hear some positive feedback.blueshine wrote: ↑Sat Aug 17, 2019 7:43 pmI can confirm that this does work to disable auto-relock on a PX3, but both changes are required, just the first one by itself had no apparent effect. I also timed the auto-relock and it's 45 seconds.saeb wrote: ↑Mon Aug 12, 2019 7:24 pm Ok, try this. It will not give you the menu but should set the default option on ignition cycle as disabled.
I would make the change. Shut everything down, lock, unlock, shutdown, lock. Then press the unlock button and see if it stays unlocked.
726-21-01 from xxxx-x1xx-xxxx to xxxx-x0xx-xxxx
and possibly but probably not required so try the above only first.
726-15-02 from 0101-0101-01xx to 0202-0202-02xx
Thank you so much for your help!
Enjoy.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 11
- Joined: Sat Feb 22, 2020 11:17 pm
- Location: Brisbane
- Model Of Vehicle: RANGER WILDTRAK PX3
- Year Of Vehicle: 2019
- Forscan Dongle Type: OBDlink LX
I have a 2019 Wildtrak and it never seems to auto-relock. I have to manually lock it every time. I would rather it auto-lock when the proximity
key leaves
key leaves
2019 Wildtrak
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Totally different thing. This is for if the vehicle is unlocked with the remote but no door open. If this is your issue then look under settings, vehicle, locks and check relock.
What you may mean above is possibly plausible but have never tried certain changes to see if it actually works.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic