Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Ignition signal for dc-dc charger
-
- Donator
- Posts: 25
- Joined: Sat Jan 11, 2020 11:36 am
- Location: Brisbane
- Model Of Vehicle: RANGER XLS PX2
- Year Of Vehicle: 2016
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Been thanked: 5 times
Thanks for replying, BCDC1225D
2016 Ranger PXII Dual Cab, 3.2D,
Ironman 4x4 Bar, 9" Osram lights,
Kenwood Apple CarPlay,
Redarc Dual Battery System,
Hayman Reese Tow Bar and Cam adj.hitch,
Clearview mirrors,
ARB 140L LR Tank
iDrive, UG-MX1.4, SAEB Forscan Dongle
Ironman 4x4 Bar, 9" Osram lights,
Kenwood Apple CarPlay,
Redarc Dual Battery System,
Hayman Reese Tow Bar and Cam adj.hitch,
Clearview mirrors,
ARB 140L LR Tank
iDrive, UG-MX1.4, SAEB Forscan Dongle
-
- Donator
- Posts: 235
- Joined: Tue Nov 07, 2017 8:46 pm
- Location: Queensand
- Model Of Vehicle: RANGER XLT PX
- Year Of Vehicle: 2016
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 18 times
- Been thanked: 28 times
I have the 1225d in my ranger with agm and was also running 1240d in caravan with 200ah lithium.
Ranger charge set at 90% ? Gives me a Max v of about 14.2. After a long enough drive it will still eventually go to full variable charge so go down to 12v etc.
If you run with the headlights on it will only go down to 13.2v.
So I am running mine with no ignition on signal but must have the headlights on to stop it dropping out on low v input. I drive with headlights on anyway.
If you dont want to have headlights on then I would connect ignition on. I think Connecting to b+ will keep the charger connected to start battery longer than ignition on will.
Ranger charge set at 90% ? Gives me a Max v of about 14.2. After a long enough drive it will still eventually go to full variable charge so go down to 12v etc.
If you run with the headlights on it will only go down to 13.2v.
So I am running mine with no ignition on signal but must have the headlights on to stop it dropping out on low v input. I drive with headlights on anyway.
If you dont want to have headlights on then I would connect ignition on. I think Connecting to b+ will keep the charger connected to start battery longer than ignition on will.
2016 XLT 4x4 Space cab, Aluminium Tray, Ford Steel Bull bar. Rear bumper bar fitted for parking sensors.