Hello everyone .
I have a question ..
How to activate the rear axle lock in ford ranger 3.2 2014.
all parts are installed. must be programmed in PCM.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
activation of the rear axle lock ford ranger
-
- Junior Member
- Posts: 12
- Joined: Tue Aug 03, 2021 5:15 am
- Location: Poland
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2014
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
-
- Junior Member
- Posts: 28
- Joined: Mon Nov 23, 2020 10:44 pm
- Location: SEQ
- Model Of Vehicle: RANGER XL PX
- Year Of Vehicle: 2014
- Been thanked: 4 times
Did yours have the wiring to hook up to the diff my 2014 didn't I wired mine through the fuse box using the relay but put a switch on the dash much better for me as its on and off when i want
-
- Junior Member
- Posts: 12
- Joined: Tue Aug 03, 2021 5:15 am
- Location: Poland
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2014
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
the wiring was installed.
when you turn on the lock, you see a light on the control board.
the lock control is connected to the relay?
when you turn on the lock, you see a light on the control board.
the lock control is connected to the relay?
-
- Junior Member
- Posts: 28
- Joined: Mon Nov 23, 2020 10:44 pm
- Location: SEQ
- Model Of Vehicle: RANGER XL PX
- Year Of Vehicle: 2014
- Been thanked: 4 times
I can’t help with any of this as I bypassed all the stupidity, mine is a simple switch and relay.wojtek1981 wrote:the wiring was installed.
when you turn on the lock, you see a light on the control board.
the lock control is connected to the relay?
Sent from my iPhone using Tapatalk
-
- Junior Member
- Posts: 12
- Joined: Tue Aug 03, 2021 5:15 am
- Location: Poland
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2014
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
I have a request, give me the number of the relay which is responsible for the rear diff lock.
after a month of searching, no one is able to activate the original switch.
after a month of searching, no one is able to activate the original switch.
-
- Junior Member
- Posts: 12
- Joined: Tue Aug 03, 2021 5:15 am
- Location: Poland
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2014
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
thanks a lot