Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Low beam issue
-
- Junior Member
- Posts: 10
- Joined: Fri Jul 23, 2021 11:32 pm
- Location: Benoni
- Model Of Vehicle: RANGER XL PX2
- Year Of Vehicle: 2015
Hi all. I have a problem on my passenger side low beam. The driver side works fine, low beam and high beam but on the passenger side it is only the high beam that works. I swop the globes around thinking it might be the globe that is faulty but it is not that. Any ideas on what the problem might be and how to get it fixed.
-
- Donator
- Posts: 64
- Joined: Wed May 23, 2018 6:12 pm
- Location: Perth
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 11 times
- Been thanked: 8 times
Not 100% sure, but check the fuses. Some cars have separate fuses for each globe and their job
Aurora Blue PX2 XLT with factory canopy, Uniden CB, ARB Summit Sahara bar, Kings 9" spot light, ARB long range tank, Thule Evo roof racks and Kings awning, Falken AT3 33's
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
You swapped globe then cleared DTCs also, or at least looked at DTCs?
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Time to get a test light out and start fault finding.
Make sure to turn the lights on when re checking for DTCs.
Make sure to turn the lights on when re checking for DTCs.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic