Can someone try this with a scangauge on Sync2 please, I think firmware 4.11 and higher is required for Multi-Frames.
UG and SG do support Multi-Frame I have discovered although UG not for this module so lets test with a SG.
GPS Speed
TXD: 07D0228012
RXF: 032200000000
RXD: 2010
MTH: 000100010000maths will be wrong and I will amend later. Also the GPS is pretty slow but may be handy for cruising speeds. - Most likely will be 0004-0001-0000
NAME: SPD
an also
GPS Heading (Degrees)
TXD: 07D0228012
RXF: 032200000000
RXD: 3010
MTH: 000100010000
NAME: HED
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Sync 2 GPS speed
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 59
- Joined: Mon Jul 03, 2017 8:45 pm
- Location: Brisbane
- Model Of Vehicle: EVEREST TREND UA
- Year Of Vehicle: 2015
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Has thanked: 13 times
- Been thanked: 5 times
Got them in, will let you know the results after I get out for a drive.
2015 Everest Trend:
-
- Donator
- Posts: 59
- Joined: Mon Jul 03, 2017 8:45 pm
- Location: Brisbane
- Model Of Vehicle: EVEREST TREND UA
- Year Of Vehicle: 2015
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Has thanked: 13 times
- Been thanked: 5 times
Just did a 40Km trip, Both displayed nothing.
My scangauge ver is 4.13. Checked the settings you provided, and that's what I have entered.
My scangauge ver is 4.13. Checked the settings you provided, and that's what I have entered.
2015 Everest Trend:
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Thanks mate. It is all I needed to know at this point in time.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Resolved with Firmware 4.42AU
Will be added to new models once shipped from states.
Was nice of them to ship me a free board from the engineers bench.
Will be added to new models once shipped from states.
Was nice of them to ship me a free board from the engineers bench.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic