Is it possible to enable ambient lighting control in the XLT's or is there also a hardware requirement as well?
Cheers
Sent from my SM-G950F using Tapatalk
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Hey Guys,
-
- Donator
- Posts: 47
- Joined: Sun Jun 10, 2018 1:49 pm
- Location: Brisbane
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Been thanked: 4 times
2018 XLT, 2"Lift, Fuel Sledge Wheels, Nitto Ridge Grapplers, McArmour Hercules Bar, Rhino Pioneer Rack, Stedi 42" Light Bar, LED Upgrade, De Chromed
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
You can enable but it still requires the compatible lighting and wiring additions to the BCM. I have the required light in my front USB area tray but just need to wire it. These a 3 pin led module and fitting the tray area one is a pain, like an hour pain if you know what to do.
Door handle ones you would need to drill and cut to suit and possibly hot glue in. Drivers and Passenger compartment areas would be the easiest to fit as they are easily accessible.
Door handle ones you would need to drill and cut to suit and possibly hot glue in. Drivers and Passenger compartment areas would be the easiest to fit as they are easily accessible.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 47
- Joined: Sun Jun 10, 2018 1:49 pm
- Location: Brisbane
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Been thanked: 4 times
Thanks mate
Sent from my Lenovo YT-X703F using Tapatalksaeb wrote:You can enable but it still requires the compatible lighting and wiring additions to the BCM. I have the required light in my front USB area tray but just need to wire it. These a 3 pin led module and fitting the tray area one is a pain, like an hour pain if you know what to do.
Door handle ones you would need to drill and cut to suit and possibly hot glue in. Drivers and Passenger compartment areas would be the easiest to fit as they are easily accessible.
2018 XLT, 2"Lift, Fuel Sledge Wheels, Nitto Ridge Grapplers, McArmour Hercules Bar, Rhino Pioneer Rack, Stedi 42" Light Bar, LED Upgrade, De Chromed