Hi,
I'm new to PID scene and feeling my way through.
Looking to layout Torque Pro with relevant gauges, especially pollution sensors to see when DPF is burning off.
I've installed all Ford specific PIDs in Torque Pro but not specific that I can see for pollution.
I've brought up all PIDs in Forscan but can't reference where to find mode or PID codes to input into Torque Pro if I can at all.
Apart from scouring posts for 1 off PID settings is there any tables kicking about to help with building my layout?
Any advice on where to look would be appreciated.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
General Torque Pro PIDs for Everest
-
Scottyp003
- New Member
- Posts: 2
- Joined: Sun Nov 11, 2018 8:01 pm
- Location: Melbourne
- Model Of Vehicle: EVEREST TREND UA
- Year Of Vehicle: 2018
- Has thanked: 2 times
Stock 2018 Everest Trend, 3.2L, Black (dirty as I drive out the carwash), Cooper Discoverer AT3LT 265-60-R18
-
saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
You could start here viewtopic.php?f=57&t=217
You can also use torque pids from here.
At some point I may redo some areas to make finding everything easier.
You can also use torque pids from here.
At some point I may redo some areas to make finding everything easier.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic