Hi All,
I have a Provent 200 catchcan almost new, however i dont have the hoses or bracket to install. Ive tried multiple vendors, to purchase, but everyone only sells the complete kit.
Any suggestions?
cheers
Geoff
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Provent Catchcan Plumbing
-
geoffmc
- Donator
- Posts: 26
- Joined: Tue Apr 14, 2020 7:48 pm
- Location: Brisbane
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2020
- Has thanked: 14 times
- Been thanked: 6 times
2020 PX3 Ranger XLT - Outback Armour Adjustable suspension 50mm lift, Parabolic rear springs, ARB Summit Bar, Wildtrack Sail plane and roller shutter, 275/65R18 Cooper ST MAXX
-
CatHerder
- Donator
- Posts: 159
- Joined: Mon Apr 22, 2019 12:02 am
- Location: Canberra
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2019
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 14 times
- Been thanked: 39 times
I mounted my Provent directly the the panel in front of the air filter beside the washer bottle (I think the PS oil reservoir used to be mounted here on PX1/2) using the bracket that comes with the Provent. Used the existing PCV hose to connect to the Provent after trimming a bit off. Used a cut down Ford Festiva upper radiator hose (Supercheap-Mackay PN:CH2267) to connect from the Provent to air intake.
The top of the Provent can sit proud of the front engine bay plastic panel as the bonnet is nicely contured at this point. This will leave room to connect and run a drain hose (https://www.ebay.com.au/itm/262611653132) down to area in front of the DSF tyre.
The extra parts were about $40 from memory.
The top of the Provent can sit proud of the front engine bay plastic panel as the bonnet is nicely contured at this point. This will leave room to connect and run a drain hose (https://www.ebay.com.au/itm/262611653132) down to area in front of the DSF tyre.
The extra parts were about $40 from memory.
Ian B
PX3 XLT 3.2
PX3 XLT 3.2
-
Mr Poopypants
- Donator
- Posts: 52
- Joined: Sat Jun 24, 2017 12:57 pm
- Location: Wollongong
- Model Of Vehicle: RANGER XLS PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Has thanked: 93 times
- Been thanked: 4 times
Hi
I get my Provent gear from Western Filters in Sydney by mail. Great to deal with. They have all the bits and pieces here:
https://www.westernfilters.net.au/prove ... ing&page=1
(not sure if I did that right, again
https://www.westernfilters.net.au/prove ... ing&page=1
Remember that there are a few choices with brackets, locations to mount, which changes the hose configuration needed. Also there is a filter replacement / modification kit to update the original versions of the catchcan.
Good luck with it.
Cheers
PP
17 Ranger XLS dble ARB Ascent Canopy & Liner Summit bbar ARB bashplates OME 3in 300kg lift BridgeD697 32 ATs Provent catchcan Fuelmanager 2nd ISI bikerack Jayco EagleOB happy kids
Thanks for the tips!
Thanks for the tips!