Hi all,
I am looking to get a slimline AGM for behind my 2016 PX2 rear seat and want to have voltage monitoring at the dash. It will be running a 12V compressor fridge.
Can you all please share your dual battery setups? I'm just after some ideas and advice.
Thanks
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Slimline battery - behind seat PX2
-
- Donator
- Posts: 43
- Joined: Sun May 21, 2017 9:57 pm
- Location: Melbourne
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2016
- Has thanked: 15 times
- Been thanked: 2 times
2016 PX2 XLT Auto
Stock
Stock
-
- Donator
- Posts: 78
- Joined: Fri Jan 03, 2020 11:49 pm
- Location: Brisbane
- Model Of Vehicle: RANGER XLS PX3
- Year Of Vehicle: 2019
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 1 time
- Been thanked: 8 times
I moved the 12v socket on the Left Side of the dash to the Right Side where the USB is on a PX3 and fitted the Lightforce Dual Voltmeter with USB socket in the Left Side.
Seems to work, however I do noticed that when I plug a phone in, there's an internal voltage drop for the Aux readout which makes it read lower than it is.
The USB is powered by the Aux Battery, and the display only switches on if the Mains has power going to it.
https://au.lightforce.com/products/dual ... st-charger
Seems to work, however I do noticed that when I plug a phone in, there's an internal voltage drop for the Aux readout which makes it read lower than it is.
The USB is powered by the Aux Battery, and the display only switches on if the Mains has power going to it.
https://au.lightforce.com/products/dual ... st-charger
Ranger XLS PX3 MY19.75
-
- Donator
- Posts: 78
- Joined: Fri Jan 03, 2020 11:49 pm
- Location: Brisbane
- Model Of Vehicle: RANGER XLS PX3
- Year Of Vehicle: 2019
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 1 time
- Been thanked: 8 times
Here's a pic that voltmeter and the switches using the Lightforce Fascia Panel.
- Attachments
-
- 20211101_071920.jpg (2.25 MiB) Viewed 189 times
- 20211101_071920.jpg (2.25 MiB) Viewed 189 times
Ranger XLS PX3 MY19.75
-
- Junior Member
- Posts: 13
- Joined: Wed Feb 07, 2018 5:21 pm
- Location: Brisbane
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Has thanked: 3 times
- Been thanked: 1 time
I've originally had a 120ah kickass battery behind the rear seat on the drivers side. Has since been replaced by a 170ah lithium which fits in the same spot. Cradle it's sitting in I made myself and while it's a bit rough it holds everything in, has the Redarc and a Victron shunt for monitoring.
Talking of the shunt: https://www.victronenergy.com.au/panel- ... -712-smart
I highly recommend this. The app shows everything you need; what's going in/out etc.
Talking of the shunt: https://www.victronenergy.com.au/panel- ... -712-smart
I highly recommend this. The app shows everything you need; what's going in/out etc.
White 2018 Ranger XLT - all stock
-
- Donator
- Posts: 78
- Joined: Fri Jan 03, 2020 11:49 pm
- Location: Brisbane
- Model Of Vehicle: RANGER XLS PX3
- Year Of Vehicle: 2019
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 1 time
- Been thanked: 8 times
I have the SmartShunt (No display) but I highly recommend the BMV-712 Smart that you have.DionN wrote: ↑Mon Dec 06, 2021 9:21 pm Talking of the shunt: https://www.victronenergy.com.au/panel- ... -712-smart
I highly recommend this. The app shows everything you need; what's going in/out etc.
The SmartShunt Bluetooth range is short, it's okay if you're next to the car.
But the BMV-712 Smart Bluetooth range is significantly further, and when you're next to the car because the Bluetooth reception is stronger the connection is made much quicker also.
Ranger XLS PX3 MY19.75
-
- Donator
- Posts: 235
- Joined: Tue Nov 07, 2017 8:46 pm
- Location: Queensand
- Model Of Vehicle: RANGER XLT PX
- Year Of Vehicle: 2016
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 18 times
- Been thanked: 28 times
I have 2 victron monitors. I like them a lot but just be aware that they do not monitor the power the unit uses.
Eg leaving the unit on in a caravan parked in garage will drain the battery while soc reading will stay the same.
Eg leaving the unit on in a caravan parked in garage will drain the battery while soc reading will stay the same.
2016 XLT 4x4 Space cab, Aluminium Tray, Ford Steel Bull bar. Rear bumper bar fitted for parking sensors.
-
- Donator
- Posts: 43
- Joined: Sun May 21, 2017 9:57 pm
- Location: Melbourne
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2016
- Has thanked: 15 times
- Been thanked: 2 times
If you have 'smart charge' turned off, is a DC-DC charger really needed?
2016 PX2 XLT Auto
Stock
Stock
- RossPat
- Moderator
- Posts: 1409
- Joined: Wed Apr 04, 2018 9:33 pm
- Location: Adelaide
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 32 times
- Been thanked: 225 times
Mine charged 4 batteriesCableguy187 wrote: ↑Sun Dec 12, 2021 10:07 am If you have 'smart charge' turned off, is a DC-DC charger really needed?
Car, 1 x AGM 120amp in tub & 2 AGM 120amp in the van
Never had a problem in 3 years
I do have a Lithium in the tub now & that has a DC-DC charger due to a different charging profile needed
2018 XLT PX2 in Winning Blue
-
- Donator
- Posts: 43
- Joined: Sun May 21, 2017 9:57 pm
- Location: Melbourne
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2016
- Has thanked: 15 times
- Been thanked: 2 times
I assume 'mine' refers to the alternator?RossPat wrote: ↑Sun Dec 12, 2021 12:30 pmMine charged 4 batteriesCableguy187 wrote: ↑Sun Dec 12, 2021 10:07 am If you have 'smart charge' turned off, is a DC-DC charger really needed?
Car, 1 x AGM 120amp in tub & 2 AGM 120amp in the van
Never had a problem in 3 years
I do have a Lithium in the tub now & that has a DC-DC charger due to a different charging profile needed
2016 PX2 XLT Auto
Stock
Stock
- RossPat
- Moderator
- Posts: 1409
- Joined: Wed Apr 04, 2018 9:33 pm
- Location: Adelaide
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 32 times
- Been thanked: 225 times
Yes it doesCableguy187 wrote: ↑Sun Dec 12, 2021 1:01 pmI assume 'mine' refers to the alternator?RossPat wrote: ↑Sun Dec 12, 2021 12:30 pmMine charged 4 batteriesCableguy187 wrote: ↑Sun Dec 12, 2021 10:07 am If you have 'smart charge' turned off, is a DC-DC charger really needed?
Car, 1 x AGM 120amp in tub & 2 AGM 120amp in the van
Never had a problem in 3 years
I do have a Lithium in the tub now & that has a DC-DC charger due to a different charging profile needed
2018 XLT PX2 in Winning Blue