"dtcs in apim"

badboybubby · Sat Mar 28, 2020 5:09 pm

Hi All,

I see these in forscan after upgrading to the latest version.

Is there a fix ?

Thanks heaps.

Tue Mar 31, 2020 12:07 am

I see nothing so there must be nothing wrong............

Maybe post an image or some further information.

badboybubby · Sun Apr 05, 2020 11:58 am

Hi Stuart,

This is what forscan say

Normally Uxxxx errors are network errors that can be erased using Reset DTC button in Errors section of FORScan. But U2101 in APIM means module configuration is not compatible. It however not related to FORScan or its version.

Sun Apr 05, 2020 7:59 pm

Ok, read asbuilt for apim then write the whole module again even if it says nothing changed then clear DTCs. That will normally sort it.

What did you actually do as it will never come up with that DTC just for fun.

badboybubby · Mon Apr 06, 2020 5:31 pm

saeb wrote: ↑Sun Apr 05, 2020 7:59 pm Ok, read asbuilt for apim then write the whole module again even if it says nothing changed then clear DTCs. That will normally sort it.

What did you actually do as it will never come up with that DTC just for fun.

Ok Ill give it a try ,replace the motherboard in my laptop so Im starting to think its hardware based

Thanks For the reply