Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
New Fuel Economy Menu
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Still haven't tidied this thread but clearing codes on a dealers Ranger this afternoon I noticed the battery light on... I didn't have any time to look further as I was only there to replace my BCM. I will look into it further on a different visit.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 24
- Joined: Wed May 31, 2017 5:53 pm
- Location: Ballarat, Victoria
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2016
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Has thanked: 8 times
- Been thanked: 3 times
Hi Stewart, I went to enable the new economy menu and looking at my previous changes I have enabling the "Silent mode" menu is also done on IPC line 720-04-01. The change being xxx4-xxxx-xxxxsaeb wrote: ↑Sat Aug 26, 2017 11:40 am There are 4 features in block 720-04-01 *xxx-xxx-xx and only 2 are of any use. Forward Collision Warning Menu and the other is the new Economy Gauge. In this position from factory it would only ever be a 0 or a 2 for an Everest or a Ranger at least with our current model Firmware. If you know f others let me know so I can have a look.
As of this point it has worked for everyone else so maybe it's your adaptor. Have you made any other IPC changes successfully? PM me your VIN so I can check your firmware revision against others.
New Econ menu works a treat with both enabled.
For reference, I don't have the battery icon showing, and I have Dual Battery mode disabled atm.
Thanks for another cool edit.
Russell.
Edit: Sorry Stewart, only just saw the revised info for the silent menu. I've now changed to "3xx7-xxxx-xxxx" to have both the silent mode menu & the new econ menu. Looks all OK from what I can tell.
Thanks.
2016 PXII Ranger XLT
4x4 Auto Double Cab
in Aluminium. Now with Sync3
4x4 Auto Double Cab
in Aluminium. Now with Sync3
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Does this resolve your issue?
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 92
- Joined: Mon Mar 04, 2019 9:08 am
- Location: Plymouth UK
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2016
- Forscan Dongle Type: Other
- Has thanked: 3 times
- Been thanked: 16 times
Ill check again, im sure it said litres hour like that, but reading this thread it changes when driving to mpg or lpkm etc will have another go. Cheers
SnapOn Verus Edge 18.2
-
- Donator
- Posts: 92
- Joined: Mon Mar 04, 2019 9:08 am
- Location: Plymouth UK
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2016
- Forscan Dongle Type: Other
- Has thanked: 3 times
- Been thanked: 16 times
As soon as drive it changes to mpg. Ideal thanks much better screen
SnapOn Verus Edge 18.2
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Which is basically the same in metric. Litres per hour when not moving and litres per 100 when moving.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 146
- Joined: Sat Jun 23, 2018 11:34 pm
- Location: Perth
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Has thanked: 27 times
- Been thanked: 24 times
Thanks for this Stewart - Taken me a long time but I finaly got around to enabling it this evening!
2018 Ranger Wildtrack (Pride Orange)
-
- New Member
- Posts: 3
- Joined: Mon Sep 13, 2021 11:48 pm
- Location: Melbourne
- Model Of Vehicle: EVEREST TREND UA
- Year Of Vehicle: 2021
- Forscan Dongle Type: ELM327
Hi Stewart (or others), I have a 21.75 Everest. In Forscan, IPC module has two options, 'instant fuel economy display' which options of bar or numeric, and 'Instantaneous fuel economy numerical gauge' with options of disabled and enabled. Both seem to bring up the new display. Is one more correct than another? Or are they both doing exactly the same thing to the car?
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Probably my original naming convention and then they combined all their cluster data so some doubled up. Use either or...poyner wrote: ↑Sat Aug 13, 2022 9:03 am Hi Stewart (or others), I have a 21.75 Everest. In Forscan, IPC module has two options, 'instant fuel economy display' which options of bar or numeric, and 'Instantaneous fuel economy numerical gauge' with options of disabled and enabled. Both seem to bring up the new display. Is one more correct than another? Or are they both doing exactly the same thing to the car?
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic