I had this nutted out early last year but wrote my lines down wrong. Thanks to DreaderX for telling me it the codes I gave him didn't work.
I went back through it this arvo to fix my notes and the following will work on all Rangers and Everests. I expect output from an Everest and nothing from a Ranger.
There are 2 parts to this mod;
720-07-01 xxxx-8xxx-xxxx show intelligent 4wd menu
720-07-02 xx6x-xxxx enable mode display on intelligent 4wd menu
Yes I still have not posted half the stuff I have. Call me lazy or call me busy with other things. They will all flow through in good time.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Everest Intelligent 4wd Gauge
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
I never did take it for a drive with the gauge enabled until right now.
Using the first line on a Ranger will show traction on the rear wheels. Whether it works 100% I would not know until I hit the slippery stuff. In high 4 I saw no change with the front wheel.
Mode will not work in a Ranger as it is missing the module so no need for the second line in a Ranger.
Following is a video from my Ranger
Using the first line on a Ranger will show traction on the rear wheels. Whether it works 100% I would not know until I hit the slippery stuff. In high 4 I saw no change with the front wheel.
Mode will not work in a Ranger as it is missing the module so no need for the second line in a Ranger.
Following is a video from my Ranger
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 11
- Joined: Fri Jun 09, 2017 2:53 am
- Location: Philippines
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 9 times
- Been thanked: 1 time
This works really well on the Everest 4x4 variant. The only change needed was the first line and after that it already showed the Intelligent 4WD menu on the cluster as well as the mode selection.
Awesome work as always, Stewart!
Cheers!
Awesome work as always, Stewart!
Cheers!
Ford Everest Titanium + 3.2l
Philippines
Philippines
-
- Donator
- Posts: 59
- Joined: Mon Jul 03, 2017 8:45 pm
- Location: Brisbane
- Model Of Vehicle: EVEREST TREND UA
- Year Of Vehicle: 2015
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Has thanked: 13 times
- Been thanked: 5 times
DreaderX : What year is your Everest?
On my '15 Everest Trend, 720-07-01 original value was 0, and wont let me write the changes to make it 8.
720-07-02, the 6 value is already there in place.
Needless to say, I didn't get it working. I get "writing blocks failed - Incompatible configuration"
On my '15 Everest Trend, 720-07-01 original value was 0, and wont let me write the changes to make it 8.
720-07-02, the 6 value is already there in place.
Needless to say, I didn't get it working. I get "writing blocks failed - Incompatible configuration"
2015 Everest Trend:
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
How many blocks do you have in your IPC? Probably 7, an update to your IPC should get it working. See Ford for the update.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 59
- Joined: Mon Jul 03, 2017 8:45 pm
- Location: Brisbane
- Model Of Vehicle: EVEREST TREND UA
- Year Of Vehicle: 2015
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Has thanked: 13 times
- Been thanked: 5 times
8 blocks for me. Had a feeling that an update would be required after doing a compare with a 2017 Trend.
Mine:
IPC - Instrument Panel Control Module
Part number: EB3T-10849-KE (latest known: EB3T-10849-KG)
Strategy : EB3T-14C026-CC
Calibration: EB3T-14C088-CC
I noticed that the 2017 was of a later version to mine above. Apart from that, i could not see any differences in the configuration apart from the mine being a zero and the other being set at 8.
This what I found a few months back. Hope this works. (1) being mine, and (2) being the 2017
Vehicle Num Module Address Data1 Data2 Data3 Same? PartNumber Strategy Calibration
1 720-07-01 IPC Instrument Panel Control Module (IPC) 8401 0000 08 No EB3T-10849-KE EB3T-14C088-CC EB3T-14C026-CC Power Distribution?
2 720-07-01 IPC Instrument Panel Control Module (IPC) 8401 8000 08 No GB3T-10849-KB GB3T-14C088-CB GB3T-14C026-CB Power Distribution?
1 720-07-02 IPC Instrument Panel Control Module (IPC) 0364 00 No EB3T-10849-KE EB3T-14C088-CC EB3T-14C026-CC ?
2 720-07-02 IPC Instrument Panel Control Module (IPC) 0364 40 No GB3T-10849-KB GB3T-14C088-CB GB3T-14C026-CB ?
Mine:
IPC - Instrument Panel Control Module
Part number: EB3T-10849-KE (latest known: EB3T-10849-KG)
Strategy : EB3T-14C026-CC
Calibration: EB3T-14C088-CC
I noticed that the 2017 was of a later version to mine above. Apart from that, i could not see any differences in the configuration apart from the mine being a zero and the other being set at 8.
This what I found a few months back. Hope this works. (1) being mine, and (2) being the 2017
Vehicle Num Module Address Data1 Data2 Data3 Same? PartNumber Strategy Calibration
1 720-07-01 IPC Instrument Panel Control Module (IPC) 8401 0000 08 No EB3T-10849-KE EB3T-14C088-CC EB3T-14C026-CC Power Distribution?
2 720-07-01 IPC Instrument Panel Control Module (IPC) 8401 8000 08 No GB3T-10849-KB GB3T-14C088-CB GB3T-14C026-CB Power Distribution?
1 720-07-02 IPC Instrument Panel Control Module (IPC) 0364 00 No EB3T-10849-KE EB3T-14C088-CC EB3T-14C026-CC ?
2 720-07-02 IPC Instrument Panel Control Module (IPC) 0364 40 No GB3T-10849-KB GB3T-14C088-CB GB3T-14C026-CB ?
2015 Everest Trend:
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Yes your is pre the chime removal. If view your latest asbuilt data online it will be slight different and have additional block.
Forget about all the numbers. They will change depending on the manufacturer year and other viable. I run the latest calibration and have all options. Turn your chimes back on and then go to Ford and ask for the chimes to be disabled. They will do and update and It will then have the latest update. Go back in and make your existing changes then add the new gauge.
I have the distribution showing on a 2015 Ranger and Dreaderx enabled it on his 2015 Everest and it is fully functional.
Forget about all the numbers. They will change depending on the manufacturer year and other viable. I run the latest calibration and have all options. Turn your chimes back on and then go to Ford and ask for the chimes to be disabled. They will do and update and It will then have the latest update. Go back in and make your existing changes then add the new gauge.
I have the distribution showing on a 2015 Ranger and Dreaderx enabled it on his 2015 Everest and it is fully functional.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 59
- Joined: Mon Jul 03, 2017 8:45 pm
- Location: Brisbane
- Model Of Vehicle: EVEREST TREND UA
- Year Of Vehicle: 2015
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Has thanked: 13 times
- Been thanked: 5 times
Ah, I was wondering how I could get Ford to update it without questioning Cheers.
2015 Everest Trend:
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
The Everest Firmware appears to have slight differences or I made a change I was not aware of.
All 4 wheels light up but at the end of the day it is only a picture.
All 4 wheels light up but at the end of the day it is only a picture.
- Attachments
-
- 20170806_114656_001.jpg (115.8 KiB) Viewed 1136 times
- 20170806_114656_001.jpg (115.8 KiB) Viewed 1136 times
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 5
- Joined: Mon May 29, 2017 5:44 pm
- Location: Thailand
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2017
Thank You
______________________________
Ford Ranger 2.2 WT
Ford Ranger 2.2 WT
- rjbarrington
- Donator
- Posts: 107
- Joined: Sun May 21, 2017 8:51 pm
- Location: Wellington, New Zealand
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 30 times
- Been thanked: 11 times
No joy for me. It says incompatible configuration. Still got the old ute image though.
Sent from my SM-A320Y using Tapatalk
Sent from my SM-A320Y using Tapatalk
2015 PX2 Wildtrak, Cool White: Alpha GSE canopy, EGR flares, Ray's FDX F6 rims, 285/70R17 C General Grabber AT3, DBA T3 discs + XP pads, Öhlins, front camera, auto-fold mirrors, OBDLink MX. Sync3, Focal speakers, Redarc Elite v3, Lightforce Facia.
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Hi Richard,rjbarrington wrote: ↑Wed Aug 09, 2017 5:53 pm No joy for me. It says incompatible configuration. Still got the old ute image though.
Sent from my SM-A320Y using Tapatalk
How many lines in your IPC as built?
I would say the IPC has an older calibration as in the early days mine also showed intelligent 4wd instead of power distribution. I would enable your chimes and then go to Ford saying you want them removed. They will update the calibration to remove the chimes which will also give you access to the new gauge.
Even with the new calibration it was only showing 2 wheels turning on a Ranger but with an Everest Calibration it showed all 4 wheels turning. Honestly you are not missing much and it's plausible the new gauge could be changed to a ute but I'm not keen on spending a few hours going back through the IPC right now.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
saeb wrote: ↑Mon Jul 31, 2017 9:20 pm Yes your is pre the chime removal. If view your latest asbuilt data online it will be slight different and have additional block.
Forget about all the numbers. They will change depending on the manufacturer year and other viable. I run the latest calibration and have all options. Turn your chimes back on and then go to Ford and ask for the chimes to be disabled. They will do and update and It will then have the latest update. Go back in and make your existing changes then add the new gauge.
I have the distribution showing on a 2015 Ranger and Dreaderx enabled it on his 2015 Everest and it is fully functional.
So once the chimes have been disabled (IPC updated), can you enable the chimes again?
They don't bother me at all, but I would like the Intelligent 4WD Gauge to work as well.
Dennis - 2016 Everest Titanium
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
If you want the chimes to be re enabled you can do it through Forscan. Ford cannot re enable.
It is now power distribution where the old one was intelligent 4wd.
It is now power distribution where the old one was intelligent 4wd.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
Sorry, to clarify my question.... Can have the Power Distribution & chimes both functional at the same time?
Thanks.
Thanks.
Dennis - 2016 Everest Titanium
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Yes, once Ford do the update you will use Forscan to enable the gauge/chime together or separate.
Fords update will not show the gauge if it was not shown before. You have to make the changes to do that.
You can enable both, neither, one or the other. Whatever you choose to do through Forscan.
Fords update will not show the gauge if it was not shown before. You have to make the changes to do that.
You can enable both, neither, one or the other. Whatever you choose to do through Forscan.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
Perfect!
Thanks for your reply.
Thanks for your reply.
Dennis - 2016 Everest Titanium
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
Works a treat!
Thanks Stewart!
Sent from my SM-G930F using Tapatalk
Thanks Stewart!
Sent from my SM-G930F using Tapatalk
Dennis - 2016 Everest Titanium
-
- New Member
- Posts: 4
- Joined: Tue Jun 13, 2017 8:59 pm
- Location: Viewbank
- Model Of Vehicle: EVEREST TREND UA
- Year Of Vehicle: 2015
Can anyone take a pic of their full code for 720-07-01 and 720-07-02? I get the Power Distribution display to show up but I only get power to the rear wheels registering. No front wheel drive showing up on my Sync 2 2015 Everest.
Thank you
Thank you
Michael Haworth
2015 Ford Everest Trend
50mm lift, Rhino4x4 bar, winch, Rhino roof rack, fridge slide, drawer system
Viewbank, Vic
2015 Ford Everest Trend
50mm lift, Rhino4x4 bar, winch, Rhino roof rack, fridge slide, drawer system
Viewbank, Vic
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Dennis?
I had an issue with only rear wheels but then rewrote and Everest EPROM contents into the cluster. I have a weird feeling the early IPC may not support the 4 wheels showing up.
Even though Dennis has a Titanium I would write his whole saved forscan backup file to yours. Save yourself first. You won't break anything but will get warning due to not having all the functions. Check if 4 wheels turn and if not then it is in the EPROM so cluster out and rewrite.
I had an issue with only rear wheels but then rewrote and Everest EPROM contents into the cluster. I have a weird feeling the early IPC may not support the 4 wheels showing up.
Even though Dennis has a Titanium I would write his whole saved forscan backup file to yours. Save yourself first. You won't break anything but will get warning due to not having all the functions. Check if 4 wheels turn and if not then it is in the EPROM so cluster out and rewrite.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
Trying to enable Power Distribution mode on a mate's Trend (has chime removal update)
We have got the display to work, but no blue graph for front wheels, only the rear wheels light up.
I think I read someone else had this problem but I can't find it.
Any ideas Stewart?
Sent from my SM-G930F using Tapatalk
We have got the display to work, but no blue graph for front wheels, only the rear wheels light up.
I think I read someone else had this problem but I can't find it.
Any ideas Stewart?
Sent from my SM-G930F using Tapatalk
Dennis - 2016 Everest Titanium
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
Hahaha seems as though last posts didn't display on my phone until I posted this.
Sent from my SM-G930F using Tapatalk
Sent from my SM-G930F using Tapatalk
Dennis - 2016 Everest Titanium
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
Just tried this and no cigar.saeb wrote:Dennis?
I had an issue with only rear wheels but then rewrote and Everest EPROM contents into the cluster. I have a weird feeling the early IPC may not support the 4 wheels showing up.
Even though Dennis has a Titanium I would write his whole saved forscan backup file to yours. Save yourself first. You won't break anything but will get warning due to not having all the functions. Check if 4 wheels turn and if not then it is in the EPROM so cluster out and rewrite.
Still only rear wheels unfortunately.
Sent from my SM-G930F using Tapatalk
Dennis - 2016 Everest Titanium