Hi,
I have a 2017 PX2 Wildtrak, I have issues with my pre-collision assist the red light on the dash comes on way too early, for example I could be 2 to 3 car lengths behind someone on the highway and I will get the red light constantly on.
To remove it I have to go into the settings and set the sensitivity to "low" BUT it does not remember the setting and will reset back to "high" next time I start the car. Is this normal??
Also when I forget to change the setting, I get multiple false triggers every day; for cars turning off the road who aren't in my lane, or are 50-100mtrs down the road, it's bloody annoying.
I have the stock bumper.
I'm hoping maybe there is a forscan setting I can change to keep the pre-collision sensitivity at low?
Also I can't turn off my lane keeping assist either, that seems to be linked to the bloody Mykey thing?
Thanks for any assistance
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Pre-collision assist issues
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Turn mykey off with the admin key.
Run a CCM calibration in Forscan and see if it improves.
Run a CCM calibration in Forscan and see if it improves.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic