Hi,
Ive seen it on other models but not on a Ranger, is it possible to enable showing all 4 TPMS pressure values on the dash? (ie pic of vehicle on screen with 4 wheels and 4 pressures)
Theres a few videos showing changing the IPC AsBuilt 720-04-01 to x4xx xxx xxxx but not sure what will be required for a Ranger. Factory it was x0xx xxx xxx, i tested x4xx xxx xxx and no luck.
Obviously yes my vehicle has TPMS (2017 PX MK2 Wildtrak) and can view the pressures in forscan.
Also if its possible, to show 'Specified Pressure' were it shows 'Specified 40' for example showing your desired pressure, again seen it set as 720-04-01 to xx8x xxx xxx but not sure what would be required for a Ranger.
Thanks
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Show individual TPMS values on screen
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
The menu does not exist in the firmware so cannot be enabled.
I did flash some Euro Modeo firmware and could display the individual readings but being that the firmware was built for LHD is was pretty pointless.
I did flash some Euro Modeo firmware and could display the individual readings but being that the firmware was built for LHD is was pretty pointless.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- New Member
- Posts: 2
- Joined: Thu Oct 04, 2018 4:46 pm
- Location: Newcastle
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2017
- Has thanked: 1 time
- Been thanked: 1 time
bumping this one up! Any idea if newer versions of the firmware support TPMS readings for each wheel?
'17 Ranger Wildtrak (grey) | TJM Snorkel (wedge) | Brown Davis 148L Tank | 120ah Batt w. Redarc bcdc1225d (rear seat) | Jump-start Redarc SBI12 | GME UHF | Redarc TowPro Elite | Viofo a119s Dashcam | Polk db6502 + db652 w. Pioneer GM-D8604 | more tba!!
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Havent seen a PXIII but I believe they have the gauge for individual now.
There is currently no available downloadable firmware for the current clusters.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 13
- Joined: Thu Sep 21, 2017 6:32 pm
- Location: Frankfurt
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2016
- Has thanked: 2 times
hey guys ...
that is actually coming up on a European forum.
Any thoughts on that one?
The author wrote that it is out of a video which is showing a ranger ...
Best regards,
Luca
that is actually coming up on a European forum.
Any thoughts on that one?
The author wrote that it is out of a video which is showing a ranger ...
Best regards,
Luca
Ranger '17 Wildtrack 3,2l Extracab, 265/65R18 KO2s, H&R +50 mm
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Its PX3 not PX2.
PX3 IPC has the menu in the firmware where PX2 does not. Firmware is not available at this time.
PX3 IPC has the menu in the firmware where PX2 does not. Firmware is not available at this time.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic