I dont know if any of this is related, ive done the adjustment for Tyre size (285/70R17) i went to the max change .... my speedo is spot on with the gps, but the odo is out by about 4.5km/100km (odo says ive done 100km but gps odo days 104.5)
But i also keep getting a random fault code (spanner on dash).... the code is P0825:00-6C gear lever push/pull switch circuit (shift anticipate) could this error be related to the changes?
Ford dont know why i keep getting the error as apparently is an auto thing but my car is a manual.... any ideas ??
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Tyre size, odo error + PCM error code
- Fireguard
- Donator
- Posts: 47
- Joined: Mon Jul 17, 2017 11:01 pm
- Location: Perth
- Model Of Vehicle: RANGER XLS PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: OBDlink MX Red Wifi
- Been thanked: 5 times
Rob.
2017, PX2 XLS Manual, with a DPF
ARB Barwork all around, 2" EFS Liftkit, Canopy, ARB UVP, Custom Dual Batteries
2017, PX2 XLS Manual, with a DPF
ARB Barwork all around, 2" EFS Liftkit, Canopy, ARB UVP, Custom Dual Batteries
- Sports
- Donator
- Posts: 57
- Joined: Mon May 22, 2017 8:20 am
- Location: FNQ
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 24 times
- Been thanked: 10 times
I'm sure Stewert will chime in, but does it still throw a fault if you clear the code and change it back to 0977?
EDIT: When you say max did you change it to 726-12-01 xxxx-09DC as per this post for 285/70/17 ?
viewtopic.php?f=12&t=214
EDIT: When you say max did you change it to 726-12-01 xxxx-09DC as per this post for 285/70/17 ?
viewtopic.php?f=12&t=214
Mick
17 PX2 XLT Supercab Manual, Sync3, 2" Lift,Summit Bullbar, Fyrlyt 5000's, ARB 140l Tank, Versus Creed 17x8.5, 285x70x17 KM2, Safari Snorkel, Black Duck Seat Covers, Ozki Canvas Sliding Canopy, Steel Tray, Tint, XRS 370c,100L Water,
17 PX2 XLT Supercab Manual, Sync3, 2" Lift,Summit Bullbar, Fyrlyt 5000's, ARB 140l Tank, Versus Creed 17x8.5, 285x70x17 KM2, Safari Snorkel, Black Duck Seat Covers, Ozki Canvas Sliding Canopy, Steel Tray, Tint, XRS 370c,100L Water,
- Fireguard
- Donator
- Posts: 47
- Joined: Mon Jul 17, 2017 11:01 pm
- Location: Perth
- Model Of Vehicle: RANGER XLS PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: OBDlink MX Red Wifi
- Been thanked: 5 times
Sorry for the confusion, when I say max change I meant I've set to 0977 as per the linked posted..
I've cleared the code a few times, sometimes it won't show for several days, others it will happen multiple times a day (spanner light clears each time car is shut off, but code is still showing in log)...... deliberately haven't cleared the code for a while as ford are 'attempting' to also figure it out.
Something else I've noticed "obdlink" app doesn't always show the code, but FORScan lite does..
I've cleared the code a few times, sometimes it won't show for several days, others it will happen multiple times a day (spanner light clears each time car is shut off, but code is still showing in log)...... deliberately haven't cleared the code for a while as ford are 'attempting' to also figure it out.
Something else I've noticed "obdlink" app doesn't always show the code, but FORScan lite does..
Rob.
2017, PX2 XLS Manual, with a DPF
ARB Barwork all around, 2" EFS Liftkit, Canopy, ARB UVP, Custom Dual Batteries
2017, PX2 XLS Manual, with a DPF
ARB Barwork all around, 2" EFS Liftkit, Canopy, ARB UVP, Custom Dual Batteries
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Fault code is not related and is a totally different fault.
It will be 4.5 km out because the speedo from factory runs approx 4.5 km lower at GPS 100kph.
Your change would be about 09DD from memory but you will not do it at the moment. If you go night than 0977 then you will see a new DTC.
Does you other DTC come on say when you put in in sports shift and changes gears? The codes looks self explanatory as in sport select transmission push and pull lever. It push pull changing gears as expected?
Anyway it is a seperate fault.
It will be 4.5 km out because the speedo from factory runs approx 4.5 km lower at GPS 100kph.
Your change would be about 09DD from memory but you will not do it at the moment. If you go night than 0977 then you will see a new DTC.
Does you other DTC come on say when you put in in sports shift and changes gears? The codes looks self explanatory as in sport select transmission push and pull lever. It push pull changing gears as expected?
Anyway it is a seperate fault.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- Fireguard
- Donator
- Posts: 47
- Joined: Mon Jul 17, 2017 11:01 pm
- Location: Perth
- Model Of Vehicle: RANGER XLS PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: OBDlink MX Red Wifi
- Been thanked: 5 times
Cheers, thought it was a seperate fault - but figured I'd ask
i don't have "sports mode", unless you count nice and snappy gear shifting - my truck is a Manual --- and that's why it's a strange fault
i don't have "sports mode", unless you count nice and snappy gear shifting - my truck is a Manual --- and that's why it's a strange fault
Rob.
2017, PX2 XLS Manual, with a DPF
ARB Barwork all around, 2" EFS Liftkit, Canopy, ARB UVP, Custom Dual Batteries
2017, PX2 XLS Manual, with a DPF
ARB Barwork all around, 2" EFS Liftkit, Canopy, ARB UVP, Custom Dual Batteries
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Weird. What module is the fault code in?
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- Fireguard
- Donator
- Posts: 47
- Joined: Mon Jul 17, 2017 11:01 pm
- Location: Perth
- Model Of Vehicle: RANGER XLS PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: OBDlink MX Red Wifi
- Been thanked: 5 times
I took a screen capture of the fault a while ago... I get the same code each time
- Attachments
-
- IMG_2355.PNG (127.62 KiB) Viewed 496 times
- IMG_2355.PNG (127.62 KiB) Viewed 496 times
Rob.
2017, PX2 XLS Manual, with a DPF
ARB Barwork all around, 2" EFS Liftkit, Canopy, ARB UVP, Custom Dual Batteries
2017, PX2 XLS Manual, with a DPF
ARB Barwork all around, 2" EFS Liftkit, Canopy, ARB UVP, Custom Dual Batteries
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Well good luck to them... It will be interesting to find out what the problem is if they resolve and tell you. I assume it has done it since new with only 423 km on the ODO. I wonder if an auto selectshift asbuilt has been put in the PCM and if it has then every time they try to do a PCM update it will always pull down the original wrong asbuilt so it will always revolve until head office engineers get is modified on the backend.
Just a thought anyway as to even get that sorted will be a head ****
PM me your VIN, It will be interesting to look at your asbuilt config for the PCM.
Just a thought anyway as to even get that sorted will be a head ****
PM me your VIN, It will be interesting to look at your asbuilt config for the PCM.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 56
- Joined: Sat May 27, 2017 9:02 am
- Location: Sydney Australia
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
- Been thanked: 7 times
Some manual vehicles have a switch, probably not used in the Ranger, that allows for computer controlled rev matching etc. Some cars do that and detect when you place your hand on the shifter, commence shifting etc. Switch etc might be present even if the feature isn't used. Might be a fault there at a guess.
Frozen White '17 Ranger FX4 6spd Auto. 2" lift with 285/65-18 tyres
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Fireguard, your PCM is set for a manual so it is not that. I can only assume Ford have tried a PMI update on the PCM? Otherwise nothing comes to mind and the Ford service crew could not enlighten me this arvo.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- New Member
- Posts: 4
- Joined: Tue Jun 13, 2017 8:59 pm
- Location: Viewbank
- Model Of Vehicle: EVEREST TREND UA
- Year Of Vehicle: 2015
I applied the 0977 code to compensate for my 265/70/18 tyres. Before the fix my gps would read 103 while my speedo was at 100. Since the fix my speedo and gps are dead on.
Michael Haworth
2015 Ford Everest Trend
50mm lift, Rhino4x4 bar, winch, Rhino roof rack, fridge slide, drawer system
Viewbank, Vic
2015 Ford Everest Trend
50mm lift, Rhino4x4 bar, winch, Rhino roof rack, fridge slide, drawer system
Viewbank, Vic
- Fireguard
- Donator
- Posts: 47
- Joined: Mon Jul 17, 2017 11:01 pm
- Location: Perth
- Model Of Vehicle: RANGER XLS PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: OBDlink MX Red Wifi
- Been thanked: 5 times
Who's interested in an update.......
Truck is still coming up with this same fault code
Neutral switch has been changed 3 times on the top of the gearbox. - No luck
Pin test done on the neutral switch plugs. - Still no luck
PCM completely replaced (done yesterday) - the light still f@rking comes on occasionally.
We're running out of ideas now - PCM replacement was though to be the last step, now there's talk of possibly replacing the wiring loom....
6months in and still not fixed.
so much for, get rid of the old car with problems for a nice brand spanker with no problems..
Truck is still coming up with this same fault code
Neutral switch has been changed 3 times on the top of the gearbox. - No luck
Pin test done on the neutral switch plugs. - Still no luck
PCM completely replaced (done yesterday) - the light still f@rking comes on occasionally.
We're running out of ideas now - PCM replacement was though to be the last step, now there's talk of possibly replacing the wiring loom....
6months in and still not fixed.
so much for, get rid of the old car with problems for a nice brand spanker with no problems..
Rob.
2017, PX2 XLS Manual, with a DPF
ARB Barwork all around, 2" EFS Liftkit, Canopy, ARB UVP, Custom Dual Batteries
2017, PX2 XLS Manual, with a DPF
ARB Barwork all around, 2" EFS Liftkit, Canopy, ARB UVP, Custom Dual Batteries
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Have you changed anything else in any other module?Fireguard wrote: ↑Thu Feb 08, 2018 3:23 am Who's interested in an update.......
Truck is still coming up with this same fault code
Neutral switch has been changed 3 times on the top of the gearbox. - No luck
Pin test done on the neutral switch plugs. - Still no luck
PCM completely replaced (done yesterday) - the light still f@rking comes on occasionally.
We're running out of ideas now - PCM replacement was though to be the last step, now there's talk of possibly replacing the wiring loom....
6months in and still not fixed.
so much for, get rid of the old car with problems for a nice brand spanker with no problems..
Have to changed the BCM asbuilt back to factory, not one line but every line?
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- Fireguard
- Donator
- Posts: 47
- Joined: Mon Jul 17, 2017 11:01 pm
- Location: Perth
- Model Of Vehicle: RANGER XLS PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: OBDlink MX Red Wifi
- Been thanked: 5 times
The changes I made (a few months ago now)
Fuel tank size
Tyre size
temp on centre console (xls)
removed shift light
enable silent mode
disable door/belt beeps
disable autostop (I've got a manual) -- this is one I'm thinking about turning back on and see if it makes a difference.
I think that's the only bits that I changed
Ford said they did a complete reset and reload, a while ago - but to never had to reinput these changes
Fuel tank size
Tyre size
temp on centre console (xls)
removed shift light
enable silent mode
disable door/belt beeps
disable autostop (I've got a manual) -- this is one I'm thinking about turning back on and see if it makes a difference.
I think that's the only bits that I changed
Ford said they did a complete reset and reload, a while ago - but to never had to reinput these changes
Rob.
2017, PX2 XLS Manual, with a DPF
ARB Barwork all around, 2" EFS Liftkit, Canopy, ARB UVP, Custom Dual Batteries
2017, PX2 XLS Manual, with a DPF
ARB Barwork all around, 2" EFS Liftkit, Canopy, ARB UVP, Custom Dual Batteries
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
They can write a replacement calibration file with IDS but it will as you have seen depending on how it is done will be whether the asbuilt is re written with factory data.
Your factory asbuilt has not been written or you would have lost most of those options.
Personally I would write the factory asbuilt file to all modules in the vehicle and is what I think you should do.
Feel free to send a PM with VIN and your email address and I will help get it back to stock.
If it fixes everything then great.
Your factory asbuilt has not been written or you would have lost most of those options.
Personally I would write the factory asbuilt file to all modules in the vehicle and is what I think you should do.
Feel free to send a PM with VIN and your email address and I will help get it back to stock.
If it fixes everything then great.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 6
- Joined: Wed Jul 04, 2018 8:08 am
- Location: Brazil
- Model Of Vehicle: RANGER XLT PX
- Year Of Vehicle: 2013
Is the line 726-12-01 unavaiable on PX1 Ranger?
Ford Ranger XLT PX 3.2
35x12.5R17 AT - Brazil!
35x12.5R17 AT - Brazil!
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
No, none of the lines on here work with a PX1 or BT-50. You will only have a pre selection of 3 tyre sizes and they are usually set at the largest.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 8
- Joined: Mon May 11, 2020 2:26 pm
- Location: Perth
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2016
Bringing up an old thread here but was was the fix in the end ?
As i am now getting the same code regularly and mine is a manual also .
Sent from my SM-A305YN using Tapatalk
As i am now getting the same code regularly and mine is a manual also .
Sent from my SM-A305YN using Tapatalk
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
I have yet to write custom calibrations for the manual for larger tyre sizes. It is planned for 2021.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic