Ranger Mods

2014 xl extended cab chassis 2.2 litre auto.
Have to date installed fog lights as drl lights, nudge bar and led spotlight, handle to rhs A pillar, ignition led ring, led’s to interior lights, idrive, stone shields to front of vehicle, dual battery and fridge in rear tray with Redarc dcdc controller, redarc brake controller, modified 12v dash sockets to turn off with ignition, tinted windows and door eyebrows.
Replaced left and right external mirrors with flat glass and catch can and prefilter installed. Kings awnings fitted side and back to carry bars and a rear under tray ladder to allow access to the tray.
The only other planned instal is a flow through valve in the transmission and perhaps a transmission cooler.

How did you go pulling the mirror glass off?

The right hand drivers mirror came off with no problems, however the left hand glass resulted in a broken motor mounting point which required a new mirror housing. Purchased an aftermarket housing but after fitting and replacing the glass it vibrates at speed.
The aftermarket housings have a completely different motor setup to original and dont appear to be as firm and stable as the original.
If i was to do it again i would purchase the glass without the backing plate and silicon it straight to the existing glass.

Have added some xls rims and Bonnet struts.