Ranger Mods

Hi all,

Im looking at installing a electric wildtrak roller to a px3 wildtrak (pre electric roller), my vehicle doesnt have the module needed to make it work.

My question is can i purchase one of saebs remote start module and re-wire the output to get it to open and close a wildtrak roller, with the unlock, lock, unlock sequence?

Any other ideas are welcomed

No the module will not allow it.

Would take a fair bit of investigating but I will assume the electric roller will have a rear tailgate module in it which could be wired to the BCM then with additional BCM programming and a new set of 3 button remotes it would work.

It is not something I can test or really investigate further unless I were to RnD on aa vehicle I have here with the components though. It is more something I would spend the time on in my own vehicle then post the outcome.