Hi all,
I've been searching through this forum for specific information regarding dedicated DRL's with no real success.
I've enabled DRL's via Forscan non as built, and can select what lights I want as DRL's, that's easy enough. But I want to install dedicated DRL's and wire and pin it back to the BCM.
Has anyone done this? Do you have any wiring diagrams including where to pin it to on the BCM, or further information on what is required? Where have you sourced the pins from to pin the BCM plug?
Cheers,
Daniel.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Dedicated DRL's
- RossPat
- Moderator
- Posts: 1409
- Joined: Wed Apr 04, 2018 9:33 pm
- Location: Adelaide
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 32 times
- Been thanked: 225 times
Stewart did have DRL pin kits available, just hang in there and I am sure he will be along to help.
2018 XLT PX2 in Winning Blue
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Did and haven't at the moment. I pulled out my last lot the other week and they were the wrong terminals, sucks a lot.
Seeing what I can do and will follow up here when I have some answers.
Seeing what I can do and will follow up here when I have some answers.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic