Ranger Mods

Hi all,

I've been searching through this forum for specific information regarding dedicated DRL's with no real success.

I've enabled DRL's via Forscan non as built, and can select what lights I want as DRL's, that's easy enough. But I want to install dedicated DRL's and wire and pin it back to the BCM.

Has anyone done this? Do you have any wiring diagrams including where to pin it to on the BCM, or further information on what is required? Where have you sourced the pins from to pin the BCM plug?

Cheers,
Daniel.

Stewart did have DRL pin kits available, just hang in there and I am sure he will be along to help.

Did and haven't at the moment. I pulled out my last lot the other week and they were the wrong terminals, sucks a lot.

Seeing what I can do and will follow up here when I have some answers.

Cheers thanks.