Changing the fuel litres and distance to empty with Forscan

brock · Sun Jun 16, 2019 5:41 pm

Would anyone be able to help with changing the fuel tank size using a Forscan?

I’ve tried find out how/where to change it within Forscan, without any success. But in saying that, I’ve got no experience with it, but it doesn’t appear to be too hard to use...

Cheers

Sun Jun 16, 2019 7:25 pm

brock wrote: ↑Sun Jun 16, 2019 5:41 pm Would anyone be able to help with changing the fuel tank size using a Forscan?

I’ve tried find out how/where to change it within Forscan, without any success. But in saying that, I’ve got no experience with it, but it doesn’t appear to be too hard to use...

Cheers

If you ask for help someone in your area may offer to help.

If you have your laptop, Forscan & dongle all working then you could get some one to guide you through it over the phone.

Most important that Forscan has a license, either free or paid license.

Without a license you can't see all the modules.

Sun Jun 16, 2019 7:42 pm

From what I read, you already have Forscan. Follow this guide viewtopic.php?f=12&t=1341 but you will be looking from Fuel tank size which will currently be showing 80 instead of DRL. Change to your desired size.

brock · Sat Jun 22, 2019 2:54 pm

Just watching this video, I only have a fraction of options in the configuration and programming. And I don't have the IPC module configuration, where I can see you change the fuel tank size. Is there a way around this?

Sat Jun 22, 2019 4:56 pm

brock wrote: ↑Sat Jun 22, 2019 2:54 pm Just watching this video, I only have a fraction of options in the configuration and programming. And I don't have the IPC module configuration, where I can see you change the fuel tank size. Is there a way around this?

Replace you dongle with something else, it appears it is not working correctly and is incompatible with all modules.

brock · Sat Jun 22, 2019 5:33 pm

I’ve just bought one off here... Hopefully that fixes the problem!

Sat Jun 22, 2019 6:43 pm

brock wrote: ↑Sat Jun 22, 2019 5:33 pm I’ve just bought one off here... Hopefully that fixes the problem!

It will work as it should, no worries.

brock · Sat Jun 22, 2019 7:03 pm

I’ve been ripping my hair out for over a month trying to find out how to do this. I didn’t think it could be that complicated...

Sat Jun 22, 2019 10:18 pm

It isn't complicated, where are you having issues.

brock · Sun Jun 23, 2019 7:05 pm

Can’t see a tenth of the stuff I’m meant to. I bought a dongle off eBay a while back, and I’m guessing that it’s no good

Sun Jun 23, 2019 9:32 pm

brock wrote: ↑Sun Jun 23, 2019 7:05 pm Can’t see a tenth of the stuff I’m meant to. I bought a dongle off eBay a while back, and I’m guessing that it’s no good

Will ship out tomorrow Brock.

eddybellamy999 · Tue Jul 02, 2019 4:02 pm

Hello,

Ive just sold my PX2 wildtrak and removed the large 140ltr tank and put it into a new PX3 wildtrak and having difficulty with changing the sync 3 settings to accept larger fuel tank is. Changing 720-03-01 from XXX3 20XX XXXX in the older sync 2 wasn't an issue to the new value XXX5 78XX XXXX. But the sync 3 isn't accepting the change, keeps coming up with service was interrupted??? Does anyone know why this is happening and how to get around it.

Tue Jul 02, 2019 7:58 pm

Changing tank size should be done easily, no manual work needed.
From memory you go into the IPC non asbuilt module and change the fuel tank size from 80 to 140
Write the change and your done.
If I have the wrong module someone will correct me.

Tue Jul 02, 2019 8:25 pm

eddybellamy999 wrote: ↑Tue Jul 02, 2019 4:02 pm Hello,

Ive just sold my PX2 wildtrak and removed the large 140ltr tank and put it into a new PX3 wildtrak and having difficulty with changing the sync 3 settings to accept larger fuel tank is. Changing 720-03-01 from XXX3 20XX XXXX in the older sync 2 wasn't an issue to the new value XXX5 78XX XXXX. But the sync 3 isn't accepting the change, keeps coming up with service was interrupted??? Does anyone know why this is happening and how to get around it.

Has nothing to do with Sync version. You could pull it out and run over it and it still would not matter.

You are making changes in the instrument cluster. First thing to check is you have nothing else plugged into other OBD ports as this is usually what happens when there is.

Make sure you are also using the latest version of Forscan and make sure there is enough voltage. With IPC, start and run the vehicle if you have too, if it is low voltage.

brock · Sat Jul 06, 2019 1:26 pm

Finally got a chance to use the new dongle...

And it worked first go!

Thanks for all your help. Now to find out what I can change...

eddybellamy999 · Thu Aug 01, 2019 6:39 pm

Updated Forscan software, had car running and tried again...ALL GOOD worked perfectly!!

Thanks for you help.

Cheers,