Possibly. I have Puddle lamp ramp up, ramp down which may do the job. Will have to plug a test light into my loom and see what the outcome is. Will let you know.Sports wrote: ↑Tue Aug 15, 2017 8:29 pm Would there be any chance we could extend the time out on the puddle lamp button?
I haven't got to this project yet, too many on the go now, but am going to add some micro led light bars on the rear and hook them up to the puddle lamp switch in the cab.
https://www.stedi.com.au/micro-st3520-7 ... d-bar.html
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Asbuilt Spreadsheet
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- Sports
- Donator
- Posts: 57
- Joined: Mon May 22, 2017 8:20 am
- Location: FNQ
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 24 times
- Been thanked: 10 times
Awesome Thanks
Mick
17 PX2 XLT Supercab Manual, Sync3, 2" Lift,Summit Bullbar, Fyrlyt 5000's, ARB 140l Tank, Versus Creed 17x8.5, 285x70x17 KM2, Safari Snorkel, Black Duck Seat Covers, Ozki Canvas Sliding Canopy, Steel Tray, Tint, XRS 370c,100L Water,
17 PX2 XLT Supercab Manual, Sync3, 2" Lift,Summit Bullbar, Fyrlyt 5000's, ARB 140l Tank, Versus Creed 17x8.5, 285x70x17 KM2, Safari Snorkel, Black Duck Seat Covers, Ozki Canvas Sliding Canopy, Steel Tray, Tint, XRS 370c,100L Water,
- GerryP
- Moderator
- Posts: 514
- Joined: Sun May 21, 2017 8:17 pm
- Location: Karoonda SA
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 58 times
- Been thanked: 82 times
It enables an additional menu on the left side small screen which allows you to alter temperature and fan speed from the steering wheel control. The changes you need is in the spreadsheet on page one.
Cheers
Gerry
'17 Ford Ranger PX2 XLT Supercab
Manual, Canopy, Flares, ROH Assassins, Smartbar Stealth, Solar & Dual Battery
'17 Ford Ranger PX2 XLT Supercab
Manual, Canopy, Flares, ROH Assassins, Smartbar Stealth, Solar & Dual Battery
-
- Donator
- Posts: 83
- Joined: Mon Jul 03, 2017 8:47 pm
- Location: Brisbane
- Model Of Vehicle: EVEREST TREND UA
- Year Of Vehicle: 2016
- Has thanked: 7 times
- Been thanked: 4 times
That's great, thank you.
Few more questions:
1) I have activated the DRL menu. I have changed 720-02-01 to xx6x xxxx xxxx. The description states "Enable DRL Menu, Enable Lane Assist and Disable Chimes". Which chimes are disabled? And what is the correct value if I want to keep these chimes active?
2) What are "Enable EQ mode in sound settings" and "Temperature Display"?
3) Can I disable the feature that turns on recirculated air every time the a/c is turned on?
4) is there a list of all the "non asbuilt" options for a 2016 everest trend? Some of the names do not make sense of what the setting might do.
Cheers
Few more questions:
1) I have activated the DRL menu. I have changed 720-02-01 to xx6x xxxx xxxx. The description states "Enable DRL Menu, Enable Lane Assist and Disable Chimes". Which chimes are disabled? And what is the correct value if I want to keep these chimes active?
2) What are "Enable EQ mode in sound settings" and "Temperature Display"?
3) Can I disable the feature that turns on recirculated air every time the a/c is turned on?
4) is there a list of all the "non asbuilt" options for a 2016 everest trend? Some of the names do not make sense of what the setting might do.
Cheers
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
The Chimes are the ones that everyone goes to Ford to remove. Can give you the change if you really want them back.
Gives additional equaliser settings in Sync2 screen. Pop rock etc. Under sounds settings.
Air no. It does it because it's more efficient and makes sense.
Every option I post is an asbuilt change. All I can do in time is change how I list items showing a picture of the change so it's understood. I'm not going to write a story about each change at the moment so if you have a question just post it up.
There are 500+ changes that can be made with all the different modules and once I'm caught up on some of my projects I will list changes that may be of benifet.
If you look to the right of the sheet you will see not every change applies to an auto or a trend, XLT etc.
My original findings are based on a Ranger XLT. There are times when an Everest, XL or a manual may require a different change to what I have listed.
Ideally at some point in time you would load your asbuilt online then it will spit out the modified asbuilt based on your selection.
I want to finish a few more hardware mods before I start looking into this.
Rgds
Stewart
Gives additional equaliser settings in Sync2 screen. Pop rock etc. Under sounds settings.
Air no. It does it because it's more efficient and makes sense.
Every option I post is an asbuilt change. All I can do in time is change how I list items showing a picture of the change so it's understood. I'm not going to write a story about each change at the moment so if you have a question just post it up.
There are 500+ changes that can be made with all the different modules and once I'm caught up on some of my projects I will list changes that may be of benifet.
If you look to the right of the sheet you will see not every change applies to an auto or a trend, XLT etc.
My original findings are based on a Ranger XLT. There are times when an Everest, XL or a manual may require a different change to what I have listed.
Ideally at some point in time you would load your asbuilt online then it will spit out the modified asbuilt based on your selection.
I want to finish a few more hardware mods before I start looking into this.
Rgds
Stewart
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
What does "Enable DTE Menu" do?
Dennis - 2016 Everest Titanium
-
- Donator
- Posts: 83
- Joined: Mon Jul 03, 2017 8:47 pm
- Location: Brisbane
- Model Of Vehicle: EVEREST TREND UA
- Year Of Vehicle: 2016
- Has thanked: 7 times
- Been thanked: 4 times
It would be great if you could give me the change, the chimes do not bother me and I like to be reminded if I've forgotten something.....
Which chimes are turned off by the change of 720-02-01 to xx6x xxxx xxxx , by the way?
No use for me then, i have sync3
shame, it bothers me when I am in the bush and start/stop the engine frequently, I guess I will have to live with it!
I was actually referring to the "direct selection" options (ie non-asbuilt, like single/dual battery), a couple of dozen in my car's case. The effect of some is pretty clear, but the name of some others does not actually tell exactly what the option does. I will post the whole list tonight or tomorrow.saeb wrote: ↑Wed Aug 16, 2017 10:48 pm Every option I post is an asbuilt change. All I can do in time is change how I list items showing a picture of the change so it's understood. I'm not going to write a story about each change at the moment so if you have a question just post it up.
There are 500+ changes that can be made with all the different modules and once I'm caught up on some of my projects I will list changes that may be of benifet.
If you look to the right of the sheet you will see not every change applies to an auto or a trend, XLT etc.
My original findings are based on a Ranger XLT. There are times when an Everest, XL or a manual may require a different change to what I have listed.
Will do soon. Is there a way to save all the modules all in one go, or do I have to save them one by one?
Cheers!
Last edited by rusty-pie on Thu Aug 17, 2017 12:39 pm, edited 3 times in total.
-
- Donator
- Posts: 83
- Joined: Mon Jul 03, 2017 8:47 pm
- Location: Brisbane
- Model Of Vehicle: EVEREST TREND UA
- Year Of Vehicle: 2016
- Has thanked: 7 times
- Been thanked: 4 times
It enables a menu in the setting where you can select normal driving or towing for remaining range calculations. Pretty useless in my case
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
Thanks.
Interesting.
I'll check it out, out of pure curiosity.
Sent from my SM-G930F using Tapatalk
Interesting.
I'll check it out, out of pure curiosity.
Sent from my SM-G930F using Tapatalk
Dennis - 2016 Everest Titanium
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
The chimes that it effects are keys in ignition. Yours would most likely not have them already and believe me and the rest of Australia, you do not want them. What you have existing will stay. There are about 4 different changes to do with different chimes.rusty-pie wrote: ↑Thu Aug 17, 2017 12:20 pmIt would be great if you could give me the change, the chimes do not bother me and I like to be reminded if I've forgotten something.....
Which chimes are turned off by the change of 720-02-01 to xx6x xxxx xxxx , by the way?
No use for me then, i have sync3
shame, it bothers me when I am in the bush and start/stop the engine frequently, I guess I will have to live with it!
I was actually referring to the "direct selection" options (ie non-asbuilt, like single/dual battery), a couple of dozen in my car's case. The effect of some is pretty clear, but the name of some others does not actually tell exactly what the option does. I will post the whole list tonight or tomorrow.saeb wrote: ↑Wed Aug 16, 2017 10:48 pm Every option I post is an asbuilt change. All I can do in time is change how I list items showing a picture of the change so it's understood. I'm not going to write a story about each change at the moment so if you have a question just post it up.
There are 500+ changes that can be made with all the different modules and once I'm caught up on some of my projects I will list changes that may be of benifet.
If you look to the right of the sheet you will see not every change applies to an auto or a trend, XLT etc.
My original findings are based on a Ranger XLT. There are times when an Everest, XL or a manual may require a different change to what I have listed.
Will do soon. Is there a way to save all the modules all in one go, or do I have to save them one by one?
Cheers!
All what direct selection is doing is changing asbuilt. Once I have a firm selection and give them the proper bit changes then they will be added to Forscan as an easy selection direct edit. (Time)...
You have to save each module one at a time. Never rely that your asbuilt on Fords servers are complete as usually they are not, so it's always best to backup anyway.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 83
- Joined: Mon Jul 03, 2017 8:47 pm
- Location: Brisbane
- Model Of Vehicle: EVEREST TREND UA
- Year Of Vehicle: 2016
- Has thanked: 7 times
- Been thanked: 4 times
OK thanks, I thought it would disable one of the chimes already present, not add a new one. Is that a chime that sounds when the keys are left in the ignition with engine off? I definitely don't want that.
I always backup the modules before and after doing any change. I'll get to save also all these that I haven't touched one of these days.
I always backup the modules before and after doing any change. I'll get to save also all these that I haven't touched one of these days.
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
This Enable DTE didn't work for me. "Incompatible Configuration" (2016 Everest Titanium)
It's a shame as I believe it would have been useful when we tow the camper, which is often....
Dennis - 2016 Everest Titanium
- bugzila
- Junior Member
- Posts: 30
- Joined: Sat May 27, 2017 11:17 am
- Location: BKK
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2015
- Has thanked: 12 times
- Been thanked: 4 times
Anybody who know the config for Bambi Mode (fogs & high beams at same time) on Everest?
I have tested with same F150 config but didn't work.
I have tested with same F150 config but didn't work.
Last edited by bugzila on Fri Aug 18, 2017 2:28 pm, edited 1 time in total.
Everest 2015 Ti, Forscan addict.
- GerryP
- Moderator
- Posts: 514
- Joined: Sun May 21, 2017 8:17 pm
- Location: Karoonda SA
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 58 times
- Been thanked: 82 times
No trick, it's the first post on page one of this thread... viewtopic.php?f=12&t=7
It scrolls left/right and up/down. Just tried on my android phone and all's working. Yell out if you're still having problems.
Cheers
Gerry
'17 Ford Ranger PX2 XLT Supercab
Manual, Canopy, Flares, ROH Assassins, Smartbar Stealth, Solar & Dual Battery
'17 Ford Ranger PX2 XLT Supercab
Manual, Canopy, Flares, ROH Assassins, Smartbar Stealth, Solar & Dual Battery
-
- Donator
- Posts: 17
- Joined: Sat Jul 29, 2017 7:41 pm
- Location: mt barker
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
Can't get it to open with Tapatalk on tablet but works on computerGerryP wrote:No trick, it's the first post on page one of this thread... viewtopic.php?f=12&t=7
It scrolls left/right and up/down. Just tried on my android phone and all's working. Yell out if you're still having problems.
Cheers
Sent from my Lenovo TB2-X30F using Tapatalk
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
That is correct. Tapatalk will not process the sheet and was not designed to do so.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 22
- Joined: Thu Jul 27, 2017 3:14 am
- Location: England
- Model Of Vehicle: RANGER LIMITED PX2 SA BUILT
- Year Of Vehicle: 2016
I didn't think you were not allowed to have Fogs and High beams on at the same time in Aus, you guys have the same law as the US then in regards to that?
Astro
2016 Ranger Limited
Panther Black
2016 Ranger Limited
Panther Black
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
You are not legally meant to run fogs with low or high. NSW had a major crack down about 5 years ago.
I think their is a clause about low visibility that may allow is under this circumstances but I would have to find it again.
I just press the button on the dash and they come in for low beam at least. I have not checked high beam.
I will make a note and check, then check my list and test for changes. Bit busy this weekend and it was stupidly cold.
Bugzilla is Thailand from memory? Update your profile please.
I think their is a clause about low visibility that may allow is under this circumstances but I would have to find it again.
I just press the button on the dash and they come in for low beam at least. I have not checked high beam.
I will make a note and check, then check my list and test for changes. Bit busy this weekend and it was stupidly cold.
Bugzilla is Thailand from memory? Update your profile please.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 22
- Joined: Thu Jul 27, 2017 3:14 am
- Location: England
- Model Of Vehicle: RANGER LIMITED PX2 SA BUILT
- Year Of Vehicle: 2016
Stewart,
If you want you can compare your findings against my asbuilt from the VIN I sent you as I can run fogs with low and high beams.
If you want you can compare your findings against my asbuilt from the VIN I sent you as I can run fogs with low and high beams.
Astro
2016 Ranger Limited
Panther Black
2016 Ranger Limited
Panther Black
- bugzila
- Junior Member
- Posts: 30
- Joined: Sat May 27, 2017 11:17 am
- Location: BKK
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2015
- Has thanked: 12 times
- Been thanked: 4 times
Thanks for the good wishes,
I think this function would be useful in some situations, such as heavy fog or off-road use.
However, I will take into account traffic rules as important.
Everest 2015 Ti, Forscan addict.
-
- Donator
- Posts: 83
- Joined: Mon Jul 03, 2017 8:47 pm
- Location: Brisbane
- Model Of Vehicle: EVEREST TREND UA
- Year Of Vehicle: 2016
- Has thanked: 7 times
- Been thanked: 4 times
This are the selections I was referring to a while ago. Some are obvious but some not so much......
- Attachments
-
- options.jpg (453.85 KiB) Viewed 369 times
- options.jpg (453.85 KiB) Viewed 369 times
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
What's the first one?
Basically a Turbo Timer?
Sent from my SM-G930F using Tapatalk
Basically a Turbo Timer?
Sent from my SM-G930F using Tapatalk
Dennis - 2016 Everest Titanium