Here you go Gerry. This will help you train your brain
Give this a go in your SG.
If there is some call for it I will make an online SG to UG and vice vera conversion tool.
01 02 - 03 04 05 06 07 08 09 0A RXF Offset - HEX
1 2 - 3 4 5 6 7 8 9 10 DEC
00 08 - 10 18 20 28 30 38 40 48 RXD Offset - HEX
0 8 - 16 24 32 40 48 56 64 72 DEC
SEND
07 E0 08 03 22 05 22 00 00 00 00
RECEIVE
07 E8 08 04 62 F4 05 46 00 00 00 Fuel Temp
07 E8 08 04 62 F4 05 47 00 00 00 Fuel Temp
07 E8 08 04 62 05 22 34 00 00 00 Static - Need to log further
Note the above contains all HEX that is transmitted and received. SG and UG do not need 2 bytes from those lines and they are calculated internally.
Name Fuel Temperature
TXD 07 E0 22 05 22
RXF 04 62 05 F4 06 05
RXD 3008
MTH 0001 0004 0000 Try this, compare to Forscan - Check and modify as necessary
Sorry I did not write down what the actual temp was but pretty sure it was 16-17 degrees celcius.
As you can see there is only 1 byte changing value - HEX 46 to 47. If you look straight up you will see where I got the HEX 30 from and then 1 byte is HEX 08 hence 3008.
I do not have a scangauge so let me know the out come.
Format does not appear to be working. I will do one in a table when I get a chance so you can see the relation properly.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Fuel Temp
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- GerryP
- Moderator
- Posts: 514
- Joined: Sun May 21, 2017 8:17 pm
- Location: Karoonda SA
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 58 times
- Been thanked: 82 times
No, it didn't work Stewart - no response in Scangauge. But it certainly displays in Forscan, so it has to be there... somewhere. I'll see if I can fry my brain and try to get my head around all those bytes in your post above... LOL
Gerry
'17 Ford Ranger PX2 XLT Supercab
Manual, Canopy, Flares, ROH Assassins, Smartbar Stealth, Solar & Dual Battery
'17 Ford Ranger PX2 XLT Supercab
Manual, Canopy, Flares, ROH Assassins, Smartbar Stealth, Solar & Dual Battery
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
07 E8 08 04 62 05 22 34 00 00 00
Use RXF 046205050622 which is what I actually expected it to be.
You will get a reading, 34 HEX may change. Mine is reading 14 on the UG which is about right. I will monitor more tomorrow.
Use RXF 046205050622 which is what I actually expected it to be.
You will get a reading, 34 HEX may change. Mine is reading 14 on the UG which is about right. I will monitor more tomorrow.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- GerryP
- Moderator
- Posts: 514
- Joined: Sun May 21, 2017 8:17 pm
- Location: Karoonda SA
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 58 times
- Been thanked: 82 times
I have most of it sussed, but the RXD 3008 has me a bit stumped (pun intended )... although the 08 (1 byte) I get.
However, I count 7 bytes before reaching the data we want. Knowing that the first byte (07) is an offset value, do we then ignore this and count only 6 bytes of offset into the data string?
Sorry mate...
Now, Hex 30 equates to 48 bits, or 6 bytes and is the offset value... right?As you can see there is only 1 byte changing value - HEX 46 to 47. If you look straight up you will see where I got the HEX 30 from and then 1 byte is HEX 08 hence 3008.
However, I count 7 bytes before reaching the data we want. Knowing that the first byte (07) is an offset value, do we then ignore this and count only 6 bytes of offset into the data string?
Sorry mate...
Gerry
'17 Ford Ranger PX2 XLT Supercab
Manual, Canopy, Flares, ROH Assassins, Smartbar Stealth, Solar & Dual Battery
'17 Ford Ranger PX2 XLT Supercab
Manual, Canopy, Flares, ROH Assassins, Smartbar Stealth, Solar & Dual Battery
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Because is starts at 00 not 08 as per that doc you read. Look at the RXD offset above 00,08,10,18,20 etc.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
My brain is 100% fluent with PID to SG and UG now.
You know that last night I was dreaming HEX. Without a joke it's true. There was some code I wanted to go through and confirm today that I was dreaming about last night and well it all worked and come true. Crappy nights sleep though..........
I will pm you a spreadsheet tomorrow and it will all make sense.
You know that last night I was dreaming HEX. Without a joke it's true. There was some code I wanted to go through and confirm today that I was dreaming about last night and well it all worked and come true. Crappy nights sleep though..........
I will pm you a spreadsheet tomorrow and it will all make sense.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- GerryP
- Moderator
- Posts: 514
- Joined: Sun May 21, 2017 8:17 pm
- Location: Karoonda SA
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 58 times
- Been thanked: 82 times
Duhhhh!!! of course!
Been a looooong time since I messed around in hex. Late 70's - early 90's I reckon when I was programming a Commodore 64 in assembler for the 6502 chip. Created a whole Bulletin Board back then - remember them - 300 baud acoustically coupled? Nah... showing my age now LOL
Thanks mate - I'll leave you alone now (for a while).
Been a looooong time since I messed around in hex. Late 70's - early 90's I reckon when I was programming a Commodore 64 in assembler for the 6502 chip. Created a whole Bulletin Board back then - remember them - 300 baud acoustically coupled? Nah... showing my age now LOL
Thanks mate - I'll leave you alone now (for a while).
Gerry
'17 Ford Ranger PX2 XLT Supercab
Manual, Canopy, Flares, ROH Assassins, Smartbar Stealth, Solar & Dual Battery
'17 Ford Ranger PX2 XLT Supercab
Manual, Canopy, Flares, ROH Assassins, Smartbar Stealth, Solar & Dual Battery
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
I may not be as old Gerry but 34 years ago I received my first computer from when my Dad was working for the banks. I'm sure it cost a bundle too. All I wanted was more speed and more RAM. I hacked that thing to death.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
OK full working gauge for Fuel Temperature
TXD: 07E0220522
RXF: 046205050622
RXD: 3008
MTH: 00010001FFD8
Enjoy
TXD: 07E0220522
RXF: 046205050622
RXD: 3008
MTH: 00010001FFD8
Enjoy
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 52
- Joined: Sun Sep 17, 2017 9:11 pm
- Location: Pakenham Upper
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 8 times
Hi Stewart,
Do you know where this sensor is located? Does it measure the fuel temp of the fuel returning from the fuel filter or does it measure the temp of the fuel in the tank?
Thanks,
Rick.
Do you know where this sensor is located? Does it measure the fuel temp of the fuel returning from the fuel filter or does it measure the temp of the fuel in the tank?
Thanks,
Rick.
Ranger Wildtrak 2 - Sep 2017
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Hi Rick,
This should help.
Connector C1259, it appears to be on the supply after the filter.
Also fuel does not return to the tank if it is below approx 30 degrees, it will continue to cycle. Once above 30 a valve on the filter opens to allow fuel to cycle through to the tank. This is done to help prevent waxing.
This should help.
Connector C1259, it appears to be on the supply after the filter.
Also fuel does not return to the tank if it is below approx 30 degrees, it will continue to cycle. Once above 30 a valve on the filter opens to allow fuel to cycle through to the tank. This is done to help prevent waxing.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 5
- Joined: Wed Aug 22, 2018 11:55 am
- Location: Narre Warren
- Model Of Vehicle: RANGER XLT PX
- Year Of Vehicle: 2013
- Forscan Dongle Type: ELM327 Bluetooth
- Has thanked: 2 times
- Been thanked: 2 times
Afternoon saeb (Stewart),
I was browsing a caravan thread, which put me onto this forum (funnily enough I had registered years ago).
https://www.expandasdownunder.com/threa ... 263/page-4
Anyway, long story short I am having an issue when towing a heavy load on a hot day - the power seems to drop dramatically.
I replaced the Viscous hub, which fixed the temperature gauge (in the dash) from going into the red.
The thread referred to above suggested a similar issue related to fuel temperature and/or lines.
Is there any chance you know how to put the following
FUEL TEMPERATURE
TDATA: 07E02205220000
TCTRL: 93 RCTRL: 31
RPOS: 2008 MTCH: 620522
X: 0001 /: 0001 +: FFD8
OUT: 00 AVE: 00
L/R: 30
into something I can use on TorquePro?
I was browsing a caravan thread, which put me onto this forum (funnily enough I had registered years ago).
https://www.expandasdownunder.com/threa ... 263/page-4
Anyway, long story short I am having an issue when towing a heavy load on a hot day - the power seems to drop dramatically.
I replaced the Viscous hub, which fixed the temperature gauge (in the dash) from going into the red.
The thread referred to above suggested a similar issue related to fuel temperature and/or lines.
Is there any chance you know how to put the following
FUEL TEMPERATURE
TDATA: 07E02205220000
TCTRL: 93 RCTRL: 31
RPOS: 2008 MTCH: 620522
X: 0001 /: 0001 +: FFD8
OUT: 00 AVE: 00
L/R: 30
into something I can use on TorquePro?
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Try this
PID: 220522
Min Value: 0
Max Value: 200
Equation A-40
Header: 7E0
PID: 220522
Min Value: 0
Max Value: 200
Equation A-40
Header: 7E0
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- RossPat
- Moderator
- Posts: 1409
- Joined: Wed Apr 04, 2018 9:33 pm
- Location: Adelaide
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 32 times
- Been thanked: 225 times
I think I got it working in OBDLink Stewart.
Min Value: 0
Max Value: 200
Header: 7E0
Mode: 22
PID: 0522
Equation A-40
It gives me a reading of 34 which would be close as the car is in a hot shed and the outside temp is currently 28c
Min Value: 0
Max Value: 200
Header: 7E0
Mode: 22
PID: 0522
Equation A-40
It gives me a reading of 34 which would be close as the car is in a hot shed and the outside temp is currently 28c
2018 XLT PX2 in Winning Blue
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Yes, looks correct Ross.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 85
- Joined: Sat Apr 28, 2018 7:50 pm
- Location: Australia
- Model Of Vehicle: EVEREST TREND UA
- Year Of Vehicle: 2017
- Forscan Dongle Type: ELS27 Clone
- Has thanked: 6 times
- Been thanked: 5 times
I had a similar thing happen but believe it may have been intercooler or trans temp related.
Make sure you monitor those as well.....
Make sure you monitor those as well.....
Cheers Tezza