Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Forscan additions
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
There are other items but they have been hidden from this release.
Naming conventions will be self explanatory most of the time but with work still to be done on the BCM.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 48
- Joined: Sun May 21, 2017 11:11 pm
- Location: Illawarra
- Model Of Vehicle: RANGER XLS PX2
- Year Of Vehicle: 2016
- Forscan Dongle Type: ELM327 with switch
- Been thanked: 4 times
Well done Stewart.
It must feel good to have some of your work recognised and implemented into a well known program.
Tony.
It must feel good to have some of your work recognised and implemented into a well known program.
Tony.
Bull bar, winch, uhf and canopy.
-
- Junior Member
- Posts: 14
- Joined: Mon May 22, 2017 7:44 am
- Location: Violet town
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Been thanked: 1 time
Hey Stewart any idea when this is being released? I would love to do some of these mods but lack confidence to hack into the hex codes
Gordo
2015 PX2 XLT Supercab
2015 PX2 XLT Supercab
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Still waiting. I will ask again, I think I may have helped slow it up as we were working on Tyre size changes for the automatic transmission. That has been put aside for now so I wouldn't think it would be too much longer.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Update is they are trying their best to do a release this weekend.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Ok peoples. The update is now live http://www.forscan.org/download.html
Scroll down the page and you will see a nice little link to our Forum.
Scroll down the page and you will see a nice little link to our Forum.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 5
- Joined: Wed Aug 23, 2017 6:40 pm
- Location: Deutschland
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2016
BdyCM 726-26-01 ist original 0101 0003 01 geändert in 0101 0103 01
Damit funktioniert das Abbiegelicht über die Nebelscheinwerfer beim blinken und einer Geschwindigkeit vom Ranger unter 40km/h.
Damit funktioniert das Abbiegelicht über die Nebelscheinwerfer beim blinken und einer Geschwindigkeit vom Ranger unter 40km/h.
Ford Ranger Wildtrack PX2, 3,2TDCI, Automatik
-
- Junior Member
- Posts: 97
- Joined: Mon Jun 26, 2017 9:33 pm
- Location: Gold Coast QLD
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2016
- Has thanked: 1 time
- Been thanked: 4 times
so any options already enabled in the sync3 by default (eg.outside air temp) will show up in Forscan list as Enabled already and not need to be reselected?
Greg
2016 PX2 XLT Dual cab 4x4
Sync 3 Auto
2016 PX2 XLT Dual cab 4x4
Sync 3 Auto
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
I haven't added anything for Sync 3 as I do not have it to test. I would have assumed by default AUS would have had it. But if and when I do add it, it will show it's current state (Enabled or Disabled).
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 97
- Joined: Mon Jun 26, 2017 9:33 pm
- Location: Gold Coast QLD
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2016
- Has thanked: 1 time
- Been thanked: 4 times
Hi mate been playing this arvo with the new menus.
can I get some clarification of these menu options?
temp mode
Silent mode
vehicle set to ute but shows wagon in power distribution
I take it the Remote start options need modules
Tested on my sync3 and the following are default settings already enabled in list/
chimes through speaker only
outside air temp already enabled in sync 3
EQ mode not in list, can we add separate options as well as keeping the auto menus?
set Tyres to 977 from 938 so will have to do until we can lock in correct sizes.
again great work
can I get some clarification of these menu options?
temp mode
Silent mode
vehicle set to ute but shows wagon in power distribution
I take it the Remote start options need modules
Tested on my sync3 and the following are default settings already enabled in list/
chimes through speaker only
outside air temp already enabled in sync 3
EQ mode not in list, can we add separate options as well as keeping the auto menus?
set Tyres to 977 from 938 so will have to do until we can lock in correct sizes.
again great work
Greg
2016 PX2 XLT Dual cab 4x4
Sync 3 Auto
2016 PX2 XLT Dual cab 4x4
Sync 3 Auto
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
subzero747 wrote: ↑Wed Nov 22, 2017 6:07 pm Hi mate been playing this arvo with the new menus.
can I get some clarification of these menu options?
temp mode
** ?
Silent mode
** Adds silent mode menu in vehicle settings and when enabled stops exterior and interior lights from illumination when locking or unlocking vehicle.
vehicle set to ute but shows wagon in power distribution
** Power distribution pic is in firmware and cannot be changed. The vehicle image for auto cruise/radar distance will change though.
I take it the Remote start options need modules
**IPC does not support remote start menu but they have not been removed as yet. They were carried on from another vehicle.
Tested on my sync3 and the following are default settings already enabled in list/
** This has nothing to do with sync 3. You were changing IPC non asbuilt
chimes through speaker only
** As above is for IPC which forward chimes if need be to APIM (Sync 3)
outside air temp already enabled in sync 3
** As above is for IPC. Add remove temperature from left hand screen on IPC
EQ mode not in list, can we add separate options as well as keeping the auto menus?
** EQ mode is for Sync 2. I do not understand what you mean, separate options, auto menus?
set Tyres to 977 from 938 so will have to do until we can lock in correct sizes.
** Changes would have to be made in a different area of the TCM for this to happen. The required changes are not in asbuilt.
again great work
** Thanks
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic