Forscan additions

Sat Sep 16, 2017 11:13 pm

: 2017-09-16 22_44_41-FORScan.png (22.09 KiB) Viewed 1315 times

: 2017-09-16 22_44_41-FORScan.png (22.09 KiB) Viewed 1315 times

: 2017-09-16 22_45_08-FORScan.png (35.2 KiB) Viewed 1315 times

: 2017-09-16 22_45_08-FORScan.png (35.2 KiB) Viewed 1315 times

: 2017-09-16 22_45_26-FORScan.png (13.19 KiB) Viewed 1315 times

: 2017-09-16 22_45_26-FORScan.png (13.19 KiB) Viewed 1315 times

This what will get through on the pending release. DRL's have had to added as multiple items due to limitations of the software.

There are other items but they have been hidden from this release.

Naming conventions will be self explanatory most of the time but with work still to be done on the BCM.

Tony310864 · Sun Sep 17, 2017 5:39 pm

Well done Stewart.
It must feel good to have some of your work recognised and implemented into a well known program.

Tony.

premier · Sun Sep 17, 2017 8:46 pm

great work Stewart

gordo350 · Tue Sep 26, 2017 7:59 am

Hey Stewart any idea when this is being released? I would love to do some of these mods but lack confidence to hack into the hex codes

Tue Sep 26, 2017 9:36 am

Still waiting. I will ask again, I think I may have helped slow it up as we were working on Tyre size changes for the automatic transmission. That has been put aside for now so I wouldn't think it would be too much longer.

gordo350 · Tue Sep 26, 2017 11:16 am

Thanx Stewart [emoji41]

Sat Sep 30, 2017 3:57 pm

Update is they are trying their best to do a release this weekend.

Mon Oct 02, 2017 7:57 am

Ok peoples. The update is now live http://www.forscan.org/download.html

Scroll down the page and you will see a nice little link to our Forum.

Ranger2016 · Sat Oct 14, 2017 4:49 am

BdyCM 726-26-01 ist original 0101 0003 01 geändert in 0101 0103 01
Damit funktioniert das Abbiegelicht über die Nebelscheinwerfer beim blinken und einer Geschwindigkeit vom Ranger unter 40km/h.

subzero747 · Wed Nov 22, 2017 12:19 pm

so any options already enabled in the sync3 by default (eg.outside air temp) will show up in Forscan list as Enabled already and not need to be reselected?

Wed Nov 22, 2017 3:05 pm

I haven't added anything for Sync 3 as I do not have it to test. I would have assumed by default AUS would have had it. But if and when I do add it, it will show it's current state (Enabled or Disabled).

subzero747 · Wed Nov 22, 2017 6:07 pm

Hi mate been playing this arvo with the new menus.
can I get some clarification of these menu options?
temp mode

Silent mode

vehicle set to ute but shows wagon in power distribution

I take it the Remote start options need modules

Tested on my sync3 and the following are default settings already enabled in list/
chimes through speaker only
outside air temp already enabled in sync 3

EQ mode not in list, can we add separate options as well as keeping the auto menus?

set Tyres to 977 from 938 so will have to do until we can lock in correct sizes.

again great work

Wed Nov 22, 2017 8:01 pm

subzero747 wrote: ↑Wed Nov 22, 2017 6:07 pm Hi mate been playing this arvo with the new menus.
can I get some clarification of these menu options?

temp mode

** ?

Silent mode

** Adds silent mode menu in vehicle settings and when enabled stops exterior and interior lights from illumination when locking or unlocking vehicle.

vehicle set to ute but shows wagon in power distribution

** Power distribution pic is in firmware and cannot be changed. The vehicle image for auto cruise/radar distance will change though.

I take it the Remote start options need modules

**IPC does not support remote start menu but they have not been removed as yet. They were carried on from another vehicle.

Tested on my sync3 and the following are default settings already enabled in list/

** This has nothing to do with sync 3. You were changing IPC non asbuilt

chimes through speaker only

** As above is for IPC which forward chimes if need be to APIM (Sync 3)

outside air temp already enabled in sync 3

** As above is for IPC. Add remove temperature from left hand screen on IPC

EQ mode not in list, can we add separate options as well as keeping the auto menus?

** EQ mode is for Sync 2. I do not understand what you mean, separate options, auto menus?

set Tyres to 977 from 938 so will have to do until we can lock in correct sizes.

** Changes would have to be made in a different area of the TCM for this to happen. The required changes are not in asbuilt.

again great work

** Thanks