Firstly, excellent work on the write up - very detailed and helpful! One query I do have, where did you get the harness adapter from as I would like to purchase one? Is there a part number to order?
Cheers,
James
Flick him a PM, they do work and he does check them. He did have an additional and may still have it.
I mentioned this during my little issue in that my asbuilt from Ford looked wrong. But you somehow had different values for my APIM that I had printed out before contacting you.
No idea what happened. I used the latest asbuilt for your vehicle and it sorted it, so don't over think it.
VIN is pulled from BCM or PCM so will pre fill. Use a 2017 vehicles asbuilt from an XLT and this should be ok for you.dan1481 wrote: ↑Wed Jun 06, 2018 5:23 pm Great write up and nicely detailed pictures thanks guys. I'm in the process of doing this upgrade to my 2015 XLT ranger and will be getting the screen and apim next week. I am getting one out of a 2017 mustang and was wondering if you knew where I could get the asbuilt data to suit my car and also how to add my VIN into the apim for future updates.
Cheers
Sent from my SM-G960F using Tapatalk
For you, send me a PM and I will send you a direct download link.jaygee83 wrote: ↑Fri Jun 29, 2018 10:32 pm Hi Stewart,
So I've finally managed to get hold of a SYNC 3 system - I'm just waiting on USB hub, USB hub adapter and GPS antenna. I just want to clarify a few things with regards to 'setup' of the SYNC 3 system. The SYNC 3 unit I purchased comes from a Wildtrak.
Do I need to write an entire SYNC 3 asbuilt from a SYNC 3 XLT before connecting to wi-fi? If so, where do I get this asbuilt from?
Based on previous comments, when I do connect to wi-fi Ford system should be updated showing my VIN with SYNC 3? If not, how do I go about having Ford system updated, as I believe I need this updated to download V3.0 from the Ford Owners website?
Cheers,
James
I have now tested 2 GPS antennas, currently waiting on this one to arrive and both have thrown a DTC on the APIM with code B119F - GPS Antenna - Circuit Open. Also randomly receive an error on the Sync 3 display showing a Navigation Fault, which eventually clears and the maps display. I presume both of these issues are related to the GPS antennas and I may have to just keep trying until I get a good one. Are these the same symptoms you found with other GPS antennas you tried?saeb wrote: ↑Wed Jun 13, 2018 10:59 pm Also use this https://www.ebay.com.au/itm/GPS-Antenna ... SwnCFaPZgB GPS antenna. I found some others throw DTC's but this one is error free and works perfectly.