https://www.12volt.solutions/
These guys (based in the USA) have a massive range of modules for various vehicles. Whilst Ranger is not included, there are some non-US vehicles such as Transit (I know from speaking to people through work that the systems in Transit are pretty similar to Ranger).
I've emailed them to ask the question, knowing they'll come back with "sorry we've never tested it" but I was worth a try - They may yet surprise me.
I'm particularly interested in the remote start module that starts the car when you hit the keyfob lock 3 times.
I've seen youtube videos of people stealing cars by doing something with the OBDII port and their module plugs in there so I assume its using the same principle to start the vehicle.
Anyone given one of these a try?
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Anyone tried modules from 12volt.solutions?
- RossPat
- Moderator
- Posts: 1409
- Joined: Wed Apr 04, 2018 9:33 pm
- Location: Adelaide
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 32 times
- Been thanked: 225 times
Plenty of gadgets on that site to play with.
2018 XLT PX2 in Winning Blue
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
I have actually and most were tested but not adaptable to or European based vehicle electrics.
I will be blowing some dust off some of them again soon.
I will be blowing some dust off some of them again soon.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 146
- Joined: Sat Jun 23, 2018 11:34 pm
- Location: Perth
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Has thanked: 27 times
- Been thanked: 24 times
They responded to my email asking for photos of the back of the OBDII port and the headlight switch (???). I sent these and some snippets from a wiring diagram that I had laying around.
I await their response.
I await their response.
2018 Ranger Wildtrack (Pride Orange)
-
- Donator
- Posts: 146
- Joined: Sat Jun 23, 2018 11:34 pm
- Location: Perth
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Has thanked: 27 times
- Been thanked: 24 times
UPDATE:
They have failed to respond to my emails and dont return my calls so I assume that means they're not interested in supplying anything for the PX Ranger. Meanwhile I did find an auto electrician in NSW that had fitted it running, required multiple software updates and fixes from the US and he still doesnt know how he ever got it going.
I'm going to give this one a miss!
They have failed to respond to my emails and dont return my calls so I assume that means they're not interested in supplying anything for the PX Ranger. Meanwhile I did find an auto electrician in NSW that had fitted it running, required multiple software updates and fixes from the US and he still doesnt know how he ever got it going.
I'm going to give this one a miss!
2018 Ranger Wildtrack (Pride Orange)
-
- Junior Member
- Posts: 8
- Joined: Sun Aug 12, 2018 9:23 pm
- Location: Switzerland
- Model Of Vehicle: RANGER RAPTOR PX3
- Year Of Vehicle: 2020
- Forscan Dongle Type: ELM327 with switch
I have tried calling them but no dice with any reply. I ordered a StartX module for f-150 2015-2019 to try on my 18 Wildtrak (EU) when I programmed the module it does all the clicking but it doesn’t start. I’m thinking I have to enable something with FORScan to make it work
JOHNH7
2020 Ranger Raptor / Conquer Grey
*seat belt chime mod*
*remote start*
2020 Ranger Raptor / Conquer Grey
*seat belt chime mod*
*remote start*
-
- Donator
- Posts: 92
- Joined: Mon Mar 04, 2019 9:08 am
- Location: Plymouth UK
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2016
- Forscan Dongle Type: Other
- Has thanked: 3 times
- Been thanked: 16 times
Manual or Auto, Ford have said only the manuals have the remote start function on PX3 where availablejohnh7 wrote: ↑Fri Nov 01, 2019 10:09 pm I have tried calling them but no dice with any reply. I ordered a StartX module for f-150 2015-2019 to try on my 18 Wildtrak (EU) when I programmed the module it does all the clicking but it doesn’t start. I’m thinking I have to enable something with FORScan to make it work
SnapOn Verus Edge 18.2
-
- Donator
- Posts: 146
- Joined: Sat Jun 23, 2018 11:34 pm
- Location: Perth
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Has thanked: 27 times
- Been thanked: 24 times
What happens on the dash/cluster if you sit in the car and try to remote start?johnh7 wrote: ↑Fri Nov 01, 2019 10:09 pm I have tried calling them but no dice with any reply. I ordered a StartX module for f-150 2015-2019 to try on my 18 Wildtrak (EU) when I programmed the module it does all the clicking but it doesn’t start. I’m thinking I have to enable something with FORScan to make it work
2018 Ranger Wildtrack (Pride Orange)
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Nothing should happen, the cluster should stay black.
I do have remote start working, factory remote start. Still in testing as it was a 3 year process but everything so far is working perfectly and as per factory. To cold, then heater and seats come on, to hot and aircon will come on.
I do not believe any manual Ford has ever had remote start.
More will follow for the Ranger and remote start when I get some further pricing back. Install will most likely be at BPT in Perth and Seaford in Melbourne at this stage.
I do have remote start working, factory remote start. Still in testing as it was a 3 year process but everything so far is working perfectly and as per factory. To cold, then heater and seats come on, to hot and aircon will come on.
I do not believe any manual Ford has ever had remote start.
More will follow for the Ranger and remote start when I get some further pricing back. Install will most likely be at BPT in Perth and Seaford in Melbourne at this stage.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 146
- Joined: Sat Jun 23, 2018 11:34 pm
- Location: Perth
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Has thanked: 27 times
- Been thanked: 24 times
Pending pricing, I'll be taking mine to BPT as soon as they're ready for me.saeb wrote: ↑Sat Nov 02, 2019 1:43 pm Nothing should happen, the cluster should stay black.
I do have remote start working, factory remote start. Still in testing as it was a 3 year process but everything so far is working perfectly and as per factory. To cold, then heater and seats come on, to hot and aircon will come on.
I do not believe any manual Ford has ever had remote start.
More will follow for the Ranger and remote start when I get some further pricing back. Install will most likely be at BPT in Perth and Seaford in Melbourne at this stage.
2018 Ranger Wildtrack (Pride Orange)
-
- Junior Member
- Posts: 8
- Joined: Sun Aug 12, 2018 9:23 pm
- Location: Switzerland
- Model Of Vehicle: RANGER RAPTOR PX3
- Year Of Vehicle: 2020
- Forscan Dongle Type: ELM327 with switch
Mine is an automatic. Nothing happens to the screen, I get like a clicking noise but just nothing. I was thinking about getting the keys with the remote start button from the US and maybe that should work. Any help would be greatly appreciate guys. Btw I live in Switzerland so it would be kinda difficult to get to Perthm_attt wrote: ↑Sat Nov 02, 2019 1:20 amManual or Auto, Ford have said only the manuals have the remote start function on PX3 where availablejohnh7 wrote: ↑Fri Nov 01, 2019 10:09 pm I have tried calling them but no dice with any reply. I ordered a StartX module for f-150 2015-2019 to try on my 18 Wildtrak (EU) when I programmed the module it does all the clicking but it doesn’t start. I’m thinking I have to enable something with FORScan to make it work
JOHNH7
2020 Ranger Raptor / Conquer Grey
*seat belt chime mod*
*remote start*
2020 Ranger Raptor / Conquer Grey
*seat belt chime mod*
*remote start*