Ranger Mods

Hello, does anyone know if it is possible to integrate the front and rear parking sensors in the Sync 3 MY 2019?
If so, which as-built need to be changed? Do you need the original sensors?

Thank you

Just use PX2 sensors etc. You will also need to replace the BCM.

Thanks Stewart for the answer.
But I have one doubt: if I order a BCM module in Ford with my VIN, this will be provided to me identical to mine.
If I order a BCM module for parking sensors, it will have a VIN different from my vehicle.
Is it possible to rewrite the VIN on a BCM module?

Grazie!!!

You would need Ford to program the module after it is fitted and redo PATs.

They may or may not want to do it on that BCM and they will not warrant that it will work.

Thanks Stewart,
unfortunately at Ford they do not know how to do and they do not want to take the risk to try.
I belive the easiest thing is to use an aftermarket park assistance.

If you only want the 4 front park sensors then it's not an issue, I was think you meant self parking.

You just need to see if you have the large plug under the left side of the front bumper or right side of looking from the front. It would be up near the horn. If you have the plug for the sensor loom to plug into then it is all pretty easy.

Hello, im looking for some advice. I would like to fit front parking sensors to my 2017 wildtrak which only has rear ones currently. Is this possible? And for them to work through the sync 3 unit?
Thanks for any help

Brydo wrote: ↑Fri Jan 07, 2022 10:17 am Hello, im looking for some advice. I would like to fit front parking sensors to my 2017 wildtrak which only has rear ones currently. Is this possible? And for them to work through the sync 3 unit?
Thanks for any help

viewtopic.php?t=84

Hi I have a 2016 XLT with rear parking sensors.I want to fit factory sensors on the front.is it possible to add on with factory sensors and factory harness?what’s involved?
Thanks

Samjess wrote: ↑Thu Apr 21, 2022 12:14 am Hi I have a 2016 XLT with rear parking sensors.I want to fit factory sensors on the front.is it possible to add on with factory sensors and factory harness?what’s involved?
Thanks

Suggest you read through this complete thread > viewtopic.php?t=84 <