Hello, does anyone know if it is possible to integrate the front and rear parking sensors in the Sync 3 MY 2019?
If so, which as-built need to be changed? Do you need the original sensors?
Thank you
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Add park assistance
-
- Junior Member
- Posts: 35
- Joined: Fri Dec 21, 2018 7:43 am
- Location: Italia
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 11 times
- Been thanked: 1 time
Fabrizio
Italia
Ranger Wildtrack 3.2l Diesel Auto 2017
Transit 4x4 Camper Van 2.0l Diesel 125kW 2019
Italia
Ranger Wildtrack 3.2l Diesel Auto 2017
Transit 4x4 Camper Van 2.0l Diesel 125kW 2019
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Just use PX2 sensors etc. You will also need to replace the BCM.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 35
- Joined: Fri Dec 21, 2018 7:43 am
- Location: Italia
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 11 times
- Been thanked: 1 time
Thanks Stewart for the answer.
But I have one doubt: if I order a BCM module in Ford with my VIN, this will be provided to me identical to mine.
If I order a BCM module for parking sensors, it will have a VIN different from my vehicle.
Is it possible to rewrite the VIN on a BCM module?
Grazie!!!
But I have one doubt: if I order a BCM module in Ford with my VIN, this will be provided to me identical to mine.
If I order a BCM module for parking sensors, it will have a VIN different from my vehicle.
Is it possible to rewrite the VIN on a BCM module?
Grazie!!!
Fabrizio
Italia
Ranger Wildtrack 3.2l Diesel Auto 2017
Transit 4x4 Camper Van 2.0l Diesel 125kW 2019
Italia
Ranger Wildtrack 3.2l Diesel Auto 2017
Transit 4x4 Camper Van 2.0l Diesel 125kW 2019
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
You would need Ford to program the module after it is fitted and redo PATs.
They may or may not want to do it on that BCM and they will not warrant that it will work.
They may or may not want to do it on that BCM and they will not warrant that it will work.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 35
- Joined: Fri Dec 21, 2018 7:43 am
- Location: Italia
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 11 times
- Been thanked: 1 time
Thanks Stewart,
unfortunately at Ford they do not know how to do and they do not want to take the risk to try.
I belive the easiest thing is to use an aftermarket park assistance.
unfortunately at Ford they do not know how to do and they do not want to take the risk to try.
I belive the easiest thing is to use an aftermarket park assistance.
Fabrizio
Italia
Ranger Wildtrack 3.2l Diesel Auto 2017
Transit 4x4 Camper Van 2.0l Diesel 125kW 2019
Italia
Ranger Wildtrack 3.2l Diesel Auto 2017
Transit 4x4 Camper Van 2.0l Diesel 125kW 2019
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
If you only want the 4 front park sensors then it's not an issue, I was think you meant self parking.
You just need to see if you have the large plug under the left side of the front bumper or right side of looking from the front. It would be up near the horn. If you have the plug for the sensor loom to plug into then it is all pretty easy.
You just need to see if you have the large plug under the left side of the front bumper or right side of looking from the front. It would be up near the horn. If you have the plug for the sensor loom to plug into then it is all pretty easy.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- New Member
- Posts: 3
- Joined: Fri Jan 07, 2022 10:11 am
- Location: Scotland
- Model Of Vehicle: RANGER WILDTRAK PX3
- Year Of Vehicle: 2017
- Forscan Dongle Type: ELM327 with switch
Hello, im looking for some advice. I would like to fit front parking sensors to my 2017 wildtrak which only has rear ones currently. Is this possible? And for them to work through the sync 3 unit?
Thanks for any help
Thanks for any help
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
-
- Junior Member
- Posts: 17
- Joined: Wed Apr 20, 2022 11:53 pm
- Location: NSW
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2016
- Been thanked: 1 time
Hi I have a 2016 XLT with rear parking sensors.I want to fit factory sensors on the front.is it possible to add on with factory sensors and factory harness?what’s involved?
Thanks
Thanks
2016 XLT Ranger 3inch lift,20x10 custom wheels with WILDTRACK upgrades
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Suggest you read through this complete thread > viewtopic.php?t=84 <
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic