TPMS

kavir · Mon Jul 01, 2019 5:54 pm

Hello y'all,

I currently have no TPMS on my XLT '17. Is it possible to add it? And if so, where to get the sensors and how to program through forscan?

Thank you

Kavi

Tue Jul 02, 2019 8:34 pm

Yes,

Sensors
EV6T-1A180-CB or
EV6T-1A180-DB or
EV6T-1A180-DC

Ford dealer or eBay for the sensors.

Enable in BCM and IPC non abuilt. You will see I added them with reference names "TPMS" in both modules. Program them in with TPMS tool, here wp/product/tpms-sensor-training-tool/ or elsewhere.

kavir · Thu Jul 04, 2019 3:26 pm

Thanks mate. Bought the sensors on eBay and the training tool as well. Much appreciated!

Fireguard · Fri Jul 05, 2019 2:36 pm

Would this also work for an XLS model ??

Wed Jul 10, 2019 1:51 pm

Fireguard wrote: ↑Fri Jul 05, 2019 2:36 pm Would this also work for an XLS model ??

It does work on an XLS but last time I did a test run on it there was no menu to reset the tyre pressures. Driving for a bit may override this but I did not have the car long enough to see if it would self reset.

Tony310864 · Fri Jul 12, 2019 10:53 am

When tpms is enabled on a xls there will not be a reset in the menu, to reset the ok button on the right side of the steering wheel is used.

Tony.

kavir · Fri Jul 12, 2019 10:04 pm

saeb wrote: ↑Tue Jul 02, 2019 8:34 pm Yes,

Sensors
EV6T-1A180-CB or
EV6T-1A180-DB or
EV6T-1A180-DC

Ford dealer or eBay for the sensors.

Enable in BCM and IPC non abuilt. You will see I added them with reference names "TPMS" in both modules. Program them in with TPMS tool, here wp/product/tpms-sensor-training-tool/ or elsewhere.

Hi Stewart,

Many thanks for the training tool. Arrived almost within a week. I'll wait for the sensors I ordered on eBay and post up results!

kavir · Tue Jul 30, 2019 11:25 pm

Hello Stewart,

I activated the tpms in both bcm and ipc but i don’t have the tyre pressure menu in the right screen under driver assist. Is that normal?

Sent from my iPhone using Tapatalk

Wed Jul 31, 2019 9:07 pm

kavir wrote: ↑Tue Jul 30, 2019 11:25 pm Hello Stewart,

I activated the tpms in both bcm and ipc but i don’t have the tyre pressure menu in the right screen under driver assist. Is that normal?

Sent from my iPhone using Tapatalk

Cannot confirm or deny whether it is correct or not. The SA vehicle uses different cluster firmware so I would need to flash a cluster with your firmware to check.

Send me a reminder PM about this as I will possibly pulling mine out on the weekend and can do a test.

vviglietti · Thu Oct 31, 2019 12:31 am

Hi there Stewart,
I have a Ranger 2019 XLT which I would like to retrofit the TPMS on. I see on the parts catalog, however, it lists two possibilities:
1. EV6T-1A180-DD
2. F2GT-1A180-DD
Is there a way I can identify exactly which sensor is the correct one to get?
Thanks very much,
Vito

Fri Nov 01, 2019 8:23 am

vviglietti wrote: ↑Thu Oct 31, 2019 12:31 am Hi there Stewart,
I have a Ranger 2019 XLT which I would like to retrofit the TPMS on. I see on the parts catalog, however, it lists two possibilities:
1. EV6T-1A180-DD
2. F2GT-1A180-DD
Is there a way I can identify exactly which sensor is the correct one to get?
Thanks very much,
Vito

Did you get Ford to look it up using a MY19 with TPMS sensors?

I cannot help with the correct part number but I would be guessing the EV.

Fri Nov 01, 2019 8:24 am

kavir wrote: ↑Tue Jul 30, 2019 11:25 pm Hello Stewart,

I activated the tpms in both bcm and ipc but i don’t have the tyre pressure menu in the right screen under driver assist. Is that normal?

Sent from my iPhone using Tapatalk

Did you get this sorted? If not send me PM with saved asbuilt and and I will give you a couple of changes over the weekend that should sort it.

vviglietti · Fri Nov 01, 2019 4:28 pm

saeb wrote: ↑Fri Nov 01, 2019 8:23 am
vviglietti wrote: ↑Thu Oct 31, 2019 12:31 am Hi there Stewart,
I have a Ranger 2019 XLT which I would like to retrofit the TPMS on. I see on the parts catalog, however, it lists two possibilities:
1. EV6T-1A180-DD
2. F2GT-1A180-DD
Is there a way I can identify exactly which sensor is the correct one to get?
Thanks very much,
Vito
Did you get Ford to look it up using a MY19 with TPMS sensors?

I cannot help with the correct part number but I would be guessing the EV.

Hi Stewart,

Unsurprisingly, asking a question from the dealers here of something even slightly out of the ordinary is met with glazed face response. The parts catalog naturally listed that mine was not equipped with sensors; making the search show for MY'19 showed four different offerings. I fitted the EV6T, but the sensors simply wouldn't train to the vehicle (I could read them using a TPMS scanner, but I assume the iteration of that sensor type is different to what the vehicle reads). It may be possible that the PX2 and PX3 have different BCM and possibly thus different sensors? I will be trying the F2GT offerings and see if it will be successful.

Fri Nov 01, 2019 7:06 pm

vviglietti wrote: ↑Fri Nov 01, 2019 4:28 pm
saeb wrote: ↑Fri Nov 01, 2019 8:23 am
vviglietti wrote: ↑Thu Oct 31, 2019 12:31 am Hi there Stewart,
I have a Ranger 2019 XLT which I would like to retrofit the TPMS on. I see on the parts catalog, however, it lists two possibilities:
1. EV6T-1A180-DD
2. F2GT-1A180-DD
Is there a way I can identify exactly which sensor is the correct one to get?
Thanks very much,
Vito
Did you get Ford to look it up using a MY19 with TPMS sensors?

I cannot help with the correct part number but I would be guessing the EV.
Hi Stewart,

Unsurprisingly, asking a question from the dealers here of something even slightly out of the ordinary is met with glazed face response. The parts catalog naturally listed that mine was not equipped with sensors; making the search show for MY'19 showed four different offerings. I fitted the EV6T, but the sensors simply wouldn't train to the vehicle (I could read them using a TPMS scanner, but I assume the iteration of that sensor type is different to what the vehicle reads). It may be possible that the PX2 and PX3 have different BCM and possibly thus different sensors? I will be trying the F2GT offerings and see if it will be successful.

Send me a PM before replacing them, I want you to try something.

Thinus · Mon Nov 18, 2019 8:23 pm

Hi Stewart

I was wondering regarding adding the TPMS to an SA Ford ranger XLT will it show up in the cluster or will it work ? If it will can you please advise what sensor I should Buy for an 2018 Ford ranger XLT

Thanks

Sat Nov 23, 2019 10:49 pm

No pre MY19 cluster supports displaying tyre pressures on the Cluster.

Thinus · Mon Nov 25, 2019 8:29 pm

saeb wrote: ↑Sat Nov 23, 2019 10:49 pm No pre MY19 cluster supports displaying tyre pressures on the Cluster.

Hi Stewart, but can I still add TPMS to my ranger will it work by showing the tyre flat symbol when there is a issue with one of the tyres ? or does my vehicle not support it at all ?

Kind Regards

Mon Nov 25, 2019 8:55 pm

Thinus wrote: ↑Mon Nov 25, 2019 8:29 pm
saeb wrote: ↑Sat Nov 23, 2019 10:49 pm No pre MY19 cluster supports displaying tyre pressures on the Cluster.
Hi Stewart, but can I still add TPMS to my ranger will it work by showing the tyre flat symbol when there is a issue with one of the tyres ? or does my vehicle not support it at all ?

Kind Regards

I will say it should do. Adding TPMS to PX2 has never been an issue. Keep in mind though there are some firmware differences to the SA models so it is a risk you take.

Thinus · Mon Nov 25, 2019 9:01 pm

saeb wrote: ↑Mon Nov 25, 2019 8:55 pm
Thinus wrote: ↑Mon Nov 25, 2019 8:29 pm
saeb wrote: ↑Sat Nov 23, 2019 10:49 pm No pre MY19 cluster supports displaying tyre pressures on the Cluster.
Hi Stewart, but can I still add TPMS to my ranger will it work by showing the tyre flat symbol when there is a issue with one of the tyres ? or does my vehicle not support it at all ?

Kind Regards
I will say it should do. Adding TPMS to PX2 has never been an issue. Keep in mind though there are some firmware differences to the SA models so it is a risk you take.

If you say "risk" do you mean regarding something that I can stuff up on my vehicles Electronic or the risk of trying and seeing if it will work ?

Mon Nov 25, 2019 9:18 pm

Risk as in the cost of the wheel sensors. There will be no adverse electronic issues.

Thinus · Tue Nov 26, 2019 1:34 am

saeb wrote: ↑Mon Nov 25, 2019 9:18 pm Risk as in the cost of the wheel sensors. There will be no adverse electronic issues.

Thanks, will try it and will post an update if it worked.

Titodiaz85 · Tue Mar 02, 2021 1:46 am

Dear members, I have my ranger limited 2018 (for South America it is MY18) and it was brought from the factory adaptive cruise control, lane keeping, etc. Then I was able to buy the elm237 interface with switch and download forscan paying for the full subscription. I was able to add several options, among them the climate control function on the right display, turn on the rear lights with daytime running lights, enable the off-road screen but the incline and height do not tell me that I must install a module. The only function that I have not been able to enable is the screen with the Tyre pressures, my truck brings the sensors and lights a low pressure warning light, there is a screen but it is only to reset the sensors, someone has been able to enable the display of the pressures?

Tue Mar 02, 2021 9:07 am

Titodiaz85 wrote: ↑Tue Mar 02, 2021 1:46 am Dear members, I have my ranger limited 2018 (for South America it is MY18) and it was brought from the factory adaptive cruise control, lane keeping, etc. Then I was able to buy the elm237 interface with switch and download forscan paying for the full subscription. I was able to add several options, among them the climate control function on the right display, turn on the rear lights with daytime running lights, enable the off-road screen but the incline and height do not tell me that I must install a module. The only function that I have not been able to enable is the screen with the Tyre pressures, my truck brings the sensors and lights a low pressure warning light, there is a screen but it is only to reset the sensors, someone has been able to enable the display of the pressures?

Hi.
The PX3 can show individual tyre pressures, the PX2 can't.
If you want individual pressures it can be done with an Ultraguage, Scanguage, OBDLink etc using Custom PID's from this site.