TECHNICAL SERVICE BULLETIN
Vehicles Built to 18-Nov-2016 Equipped with a 3.2L Duratorq-TDCi Engine - Combustion Knocking Noise on Cold Start
16-2080
23 December 2016
Model:
Ford
2015-2016 Ranger Build Date: Up to 18-Nov-2016
Engine: 3.2L Duratorq-TDCi (Puma) Diesel
2015-2016 Everest Build Date: Up to 18-Nov-2016
Engine: 3.2L Duratorq-TDCi (Puma) Diesel
Issue: Some 2016 Ranger and Everest vehicles built to 18-Nov-2016 equipped with a 3.2L Duratorq-TDCi engine may exhibit a combustion knocking noise for a few seconds after a cold start only.
Action: Should a vehicle present with the above concern, technicians are advised to follow the Service Instruction below.
Labor Times
Description Operation No. Time
PCM reprogramming 162080A 0.2
Repair/Claim Coding
Causal Part: 12A650
Condition Code: 04
PDR Table
PDR Code Description Time
TSB162080 Connect IDS and Reporgram the Powertrain Control Module (PCM) 0.2
Service Instruction
1. Connect IDS to the vehicle.
2. Reprogram the Powertrain Control Module (PCM) to the latest service calibration using IDS release 103.04 or later. Make sure you are connected to the internet when entering module programming to obtain the latest updates. Calibration files may also be obtained from the Professional Technicians Society website – Select Rotunda - Diagnostic Tool Support - IDS Support - Module Reprogramming.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
TSB 16-2080 - Effective Jan 6 2017
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 235
- Joined: Tue Nov 07, 2017 8:46 pm
- Location: Queensand
- Model Of Vehicle: RANGER XLT PX
- Year Of Vehicle: 2016
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 18 times
- Been thanked: 28 times
My Ranger d is not happy with the cold mornings in SW WA.
Its starts fine and after about 2 minutes the idle drops and it starts missing. It wont rev, is not running on all cyl.
Once it gets to 40c on the OBD link app its fine and is fine all day.
Its starts fine and after about 2 minutes the idle drops and it starts missing. It wont rev, is not running on all cyl.
Once it gets to 40c on the OBD link app its fine and is fine all day.
2016 XLT 4x4 Space cab, Aluminium Tray, Ford Steel Bull bar. Rear bumper bar fitted for parking sensors.
- Wildtrakpx2
- New Member
- Posts: 4
- Joined: Mon Jun 14, 2021 1:16 pm
- Location: Gympie, Qld
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2015
- Has thanked: 2 times
Does the customer pay for this fix?
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
It is a service bulletin and not a recall.
Dealer discretion if out of warranty. It is only a PCM update at he end of the day.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- Wildtrakpx2
- New Member
- Posts: 4
- Joined: Mon Jun 14, 2021 1:16 pm
- Location: Gympie, Qld
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2015
- Has thanked: 2 times
Thanks mate, I've got it sorted. Ford are covering the cost.