Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Accessory delay in 2022 wildtrak V6
-
pschofie1
- Junior Member
- Posts: 15
- Joined: Tue Feb 11, 2020 5:27 pm
- Location: Australia
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2020
- Been thanked: 1 time
Update, just to clarify this is relating the the power to the overhead switches in the ranger, I just found the power delay setting and I have changed that from the default of 1 to 3600 but this does not seem to affect the power to the switches which turn off as soon as the engine is stopped.
-
saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
The change you probably found are only related to 12 volt sockets only.
For the upfitter switches in the overhead console the wiring diagrams show they are live at all times.
The last 2 are connected through the high beam circuit so will only be of use with the ignition is on.
If you are just looking for illumination timeout of those switches only then you cannot as they are linked to the cluster and panel illumination circuit.
For the upfitter switches in the overhead console the wiring diagrams show they are live at all times.
The last 2 are connected through the high beam circuit so will only be of use with the ignition is on.
If you are just looking for illumination timeout of those switches only then you cannot as they are linked to the cluster and panel illumination circuit.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic