Hi everyone
anyone with a PX1 that has a ScanGuage/UltraGauge etc - how do you leave it plugged in and have the storage box in place? Have you unclipped the ODB socket and just left it hanging or is there enough room to plug it in and put the storage box back?
Cheers.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
ODB port access - PX1
- RodeoRanger
- Junior Member
- Posts: 6
- Joined: Mon Nov 04, 2019 5:32 pm
- Location: Sydney
- Model Of Vehicle: RANGER XL PX
- Year Of Vehicle: 2014
- Been thanked: 1 time
Andrew.
Made the leap from an elderly Rodeo to a Ranger
Made the leap from an elderly Rodeo to a Ranger
-
- Donator
- Posts: 92
- Joined: Mon Mar 04, 2019 9:08 am
- Location: Plymouth UK
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2016
- Forscan Dongle Type: Other
- Has thanked: 3 times
- Been thanked: 16 times
Dont know if same as px2 but there may be a 2nd obd port further back.
SnapOn Verus Edge 18.2
- RodeoRanger
- Junior Member
- Posts: 6
- Joined: Mon Nov 04, 2019 5:32 pm
- Location: Sydney
- Model Of Vehicle: RANGER XL PX
- Year Of Vehicle: 2014
- Been thanked: 1 time
if only m_attt .... unfortunately the PX1's only have the one port.
Andrew.
Made the leap from an elderly Rodeo to a Ranger
Made the leap from an elderly Rodeo to a Ranger
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
The OBD port should be able to be removed and pushed backwards to hide it. I have seen others cut a section out so it’s visible at all timesRodeoRanger wrote: ↑Tue Nov 05, 2019 9:08 pm Hi everyone
anyone with a PX1 that has a ScanGuage/UltraGauge etc - how do you leave it plugged in and have the storage box in place? Have you unclipped the ODB socket and just left it hanging or is there enough room to plug it in and put the storage box back?
Cheers.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 29
- Joined: Wed Nov 21, 2018 4:30 am
- Location: Epping, Melbourne
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2016
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Has thanked: 5 times
- Been thanked: 2 times
Can i ask, for those with a px2 and newer, which obd port did you plug into. Does the white one at the back support everything?
MY17 XLT Dual Cab
UNEEK4X4 Commander Bar, Safari snorkel, 2" Dobinsons monotube lift, 33's, Ascent canopy, Full Boar Forbie Drawers, Dual battery, idrive.
UNEEK4X4 Commander Bar, Safari snorkel, 2" Dobinsons monotube lift, 33's, Ascent canopy, Full Boar Forbie Drawers, Dual battery, idrive.
- RossPat
- Moderator
- Posts: 1409
- Joined: Wed Apr 04, 2018 9:33 pm
- Location: Adelaide
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 32 times
- Been thanked: 225 times
My front is white & the rear is black.Brente1982 wrote: ↑Sun Jan 19, 2020 6:33 pm Can i ask, for those with a px2 and newer, which obd port did you plug into. Does the white one at the back support everything?
My front & rear do the same thing.
I am permanently plugged into the second port.
2018 XLT PX2 in Winning Blue
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
They are the same, white is just piggy backed off the black one at the back. Which is the gateway module.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 10
- Joined: Sat Sep 15, 2018 11:57 am
- Location: Qld
- Model Of Vehicle: RANGER WILDTRAK PX
- Year Of Vehicle: 2015
Just push the white OBD plug back out of the holder then connect the scant gage cable and close the door