I keep getting the scanner and goes into limp mode at approx 100km hr .
When i get home i looked at codes and got number 1 ,2 and 4 injector heater open circuit.
Ford said i need to get it towed to them but i am 50kms away..
Any thoughts
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
For scan codes on px2 2,2litre
-
- Donator
- Posts: 235
- Joined: Tue Nov 07, 2017 8:46 pm
- Location: Queensand
- Model Of Vehicle: RANGER XLT PX
- Year Of Vehicle: 2016
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 18 times
- Been thanked: 28 times
If you have been driving it and it only goes into limp mode at 100kmh why can you not drive it 50km and stay under 100kph.
2016 XLT 4x4 Space cab, Aluminium Tray, Ford Steel Bull bar. Rear bumper bar fitted for parking sensors.
-
- Junior Member
- Posts: 7
- Joined: Tue Aug 04, 2020 7:06 pm
- Location: Brisbane
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2019
I can but its highway all the way to Ford..say other drivers might get upset with me going that slow in 100kph....lol. More so wondering if anyone knows about the codes..
-
- Donator
- Posts: 235
- Joined: Tue Nov 07, 2017 8:46 pm
- Location: Queensand
- Model Of Vehicle: RANGER XLT PX
- Year Of Vehicle: 2016
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 18 times
- Been thanked: 28 times
If I could do 80kph I would drive it.
What is the actual fault code number you are getting?
What is the actual fault code number you are getting?
2016 XLT 4x4 Space cab, Aluminium Tray, Ford Steel Bull bar. Rear bumper bar fitted for parking sensors.
-
- Junior Member
- Posts: 7
- Joined: Tue Aug 04, 2020 7:06 pm
- Location: Brisbane
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2019
It appears i have fixed it..
It waS U0001
I checked all the relays and fuses and tightened the battery terminals just drove 150kms. No codes no scanner..lets see how it progresses
It waS U0001
I checked all the relays and fuses and tightened the battery terminals just drove 150kms. No codes no scanner..lets see how it progresses
-
- Junior Member
- Posts: 7
- Joined: Tue Aug 04, 2020 7:06 pm
- Location: Brisbane
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2019
ok all so the code keeps coming back randomly..
my car was unused for 9 months and had its battery replaced with a new one 3 weeks ago.
yesterday morning it threw the same code and spanner. I pulled over turned the key off reset the code with utraguage and drove for the rest of the day no issues. I then drove the car again this morning and the code and limp came up again with in exactly the same kms. same again I pulled over turned off the ignition reset the code and continued my journey for 50kms with no reoccurrence.
so I have doen 1000kms since the battery replacement and the limp mode hase occurred 4 times but has reset and not come back at times for days ..
any thoughts please...do I need ford to reload software
Webby
my car was unused for 9 months and had its battery replaced with a new one 3 weeks ago.
yesterday morning it threw the same code and spanner. I pulled over turned the key off reset the code with utraguage and drove for the rest of the day no issues. I then drove the car again this morning and the code and limp came up again with in exactly the same kms. same again I pulled over turned off the ignition reset the code and continued my journey for 50kms with no reoccurrence.
so I have doen 1000kms since the battery replacement and the limp mode hase occurred 4 times but has reset and not come back at times for days ..
any thoughts please...do I need ford to reload software
Webby
-
- Donator
- Posts: 235
- Joined: Tue Nov 07, 2017 8:46 pm
- Location: Queensand
- Model Of Vehicle: RANGER XLT PX
- Year Of Vehicle: 2016
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 18 times
- Been thanked: 28 times
There is a lot of conflicting info online with this code but have a look at the attached page.
https://www.troublecodes.net/ucodes/u0001/
Why was the car parked? did have a problem? Have you done other work on it?
Have you had a mouse / Rat problem in that time?
Has it been on the beach/salt water
As you have replaced the battery make sure you have not left an earth wire off and as per the link make sure all the body/engine earth points are clean and good.
https://www.troublecodes.net/ucodes/u0001/
Why was the car parked? did have a problem? Have you done other work on it?
Have you had a mouse / Rat problem in that time?
Has it been on the beach/salt water
As you have replaced the battery make sure you have not left an earth wire off and as per the link make sure all the body/engine earth points are clean and good.
2016 XLT 4x4 Space cab, Aluminium Tray, Ford Steel Bull bar. Rear bumper bar fitted for parking sensors.
-
- Junior Member
- Posts: 7
- Joined: Tue Aug 04, 2020 7:06 pm
- Location: Brisbane
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2019
It was in a Panel beaters getting new tray towbar etc etc etc. no front end damage at all. so it sat with a flat battery for weeks...
If an earth was off it would throw the code all the time I would have thought.
its not a 4wd its a 2wd
If an earth was off it would throw the code all the time I would have thought.
its not a 4wd its a 2wd
-
- Donator
- Posts: 235
- Joined: Tue Nov 07, 2017 8:46 pm
- Location: Queensand
- Model Of Vehicle: RANGER XLT PX
- Year Of Vehicle: 2016
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 18 times
- Been thanked: 28 times
Ok. A good rule to follow is to look where work has been done.
I would be looking at all the rear wiring for damage and connectors where the tray and tow bar were done. Plugs not pushed together properly or damaged pins when plugs were reconnected. Sometimes pins get pushed out on plug reassembly. Wires damaged from the tray when removing or refitting. Look for damage new or different tape on the wiring looms.
Also that if a trailer light control module was fitted is it correct.
The code is saying a communications error, that could be caused by a wire rubbing intermittently.
I would be looking at all the rear wiring for damage and connectors where the tray and tow bar were done. Plugs not pushed together properly or damaged pins when plugs were reconnected. Sometimes pins get pushed out on plug reassembly. Wires damaged from the tray when removing or refitting. Look for damage new or different tape on the wiring looms.
Also that if a trailer light control module was fitted is it correct.
The code is saying a communications error, that could be caused by a wire rubbing intermittently.
2016 XLT 4x4 Space cab, Aluminium Tray, Ford Steel Bull bar. Rear bumper bar fitted for parking sensors.