Ranger Mods

So I have had my 15k service done and the oil changed but the service numpties haven't reset the oil life monitor.
Does anyone happen to know if the oil life monitor reset menu can be added to a raptor and/or how to reset it?

searching the forum has popped up a few results but none specifically for a raptor.

Push-button start, press and hold the ” Start” for two seconds without touching the brake pedal.

Next, simultaneously press the accelerator pedal and the brake pedal and hold for a minimum of 20 seconds, until a “Service: Oil reset in prog.” message shows on the instrument cluster display.

Or

IPC non as-built enable oil life menu.

I have tried to enable the oil life menu but it doesn't exist as an option to enable in forscan 2.3.38 beta

As far as the push button start thing goes. the car keeps starting. I'm holding it down for between two and five seconds and while holding it down I push the accelerator and brake simultaneously, starts everytime.

Push-button start, press and hold the ” Start” for two seconds without touching the brake pedal.

TAKE FINGER OFF START BUTTON

Next, simultaneously press the accelerator pedal and the brake pedal and hold for a minimum of 20 seconds, until a “Service: Oil reset in prog.” message shows on the instrument cluster display.