So I have had my 15k service done and the oil changed but the service numpties haven't reset the oil life monitor.
Does anyone happen to know if the oil life monitor reset menu can be added to a raptor and/or how to reset it?
searching the forum has popped up a few results but none specifically for a raptor.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
20.75 Raptor - oil life monitor (IOLM)
-
- Donator
- Posts: 13
- Joined: Thu Oct 15, 2020 6:29 pm
- Location: WA
- Model Of Vehicle: OTHER
- Year Of Vehicle: 2022
- Forscan Dongle Type: ELM327
- Been thanked: 1 time
2022 gen6 raptor
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Push-button start, press and hold the ” Start” for two seconds without touching the brake pedal.
Next, simultaneously press the accelerator pedal and the brake pedal and hold for a minimum of 20 seconds, until a “Service: Oil reset in prog.” message shows on the instrument cluster display.
Or
IPC non as-built enable oil life menu.
Next, simultaneously press the accelerator pedal and the brake pedal and hold for a minimum of 20 seconds, until a “Service: Oil reset in prog.” message shows on the instrument cluster display.
Or
IPC non as-built enable oil life menu.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 13
- Joined: Thu Oct 15, 2020 6:29 pm
- Location: WA
- Model Of Vehicle: OTHER
- Year Of Vehicle: 2022
- Forscan Dongle Type: ELM327
- Been thanked: 1 time
I have tried to enable the oil life menu but it doesn't exist as an option to enable in forscan 2.3.38 beta
As far as the push button start thing goes. the car keeps starting. I'm holding it down for between two and five seconds and while holding it down I push the accelerator and brake simultaneously, starts everytime.
As far as the push button start thing goes. the car keeps starting. I'm holding it down for between two and five seconds and while holding it down I push the accelerator and brake simultaneously, starts everytime.
2022 gen6 raptor
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Push-button start, press and hold the ” Start” for two seconds without touching the brake pedal.
TAKE FINGER OFF START BUTTON
Next, simultaneously press the accelerator pedal and the brake pedal and hold for a minimum of 20 seconds, until a “Service: Oil reset in prog.” message shows on the instrument cluster display.
TAKE FINGER OFF START BUTTON
Next, simultaneously press the accelerator pedal and the brake pedal and hold for a minimum of 20 seconds, until a “Service: Oil reset in prog.” message shows on the instrument cluster display.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic