Custom PID Calculator
Any changes, fixes or new data should be posted in the appropriate threads and it will be updated.
NB This can can be used in your browser on your mobile device and swiping left/right will allow you you view all details.
100% tested and working mgauges will go here. This will eventually fill with existing and never seen before gauges. As I get time to monitor the CAN BUS I will add more.
If there is a specific gauge you are looking for and if the vehicle supports it then start a new topic and make a request. Some things do not exist, like EOT for instance. If you monitor this you will only get what it provides and that is only on off ( oil pressure, no oil pressure ). *PX3 should support this now.
I spend an immense amount of time finding these and providing working solutions. Think twice about posting them all over the web and bring people to the site with a link instead. One it helps to build a community where answers to problems can be resolved and two it gives people an opportunity to make a small or large donation to keep the site up an running to share this information. Helping the site helps you enjoy your vehicle to its full potential.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
OBDLINK APP PID CALCULATOR
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- Sports
- Donator
- Posts: 57
- Joined: Mon May 22, 2017 8:20 am
- Location: FNQ
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 24 times
- Been thanked: 10 times
Tried the tyre temp yesterday with torque pro, no data , I'll check the settings today and give it another go.
Cheers
Cheers
Mick
17 PX2 XLT Supercab Manual, Sync3, 2" Lift,Summit Bullbar, Fyrlyt 5000's, ARB 140l Tank, Versus Creed 17x8.5, 285x70x17 KM2, Safari Snorkel, Black Duck Seat Covers, Ozki Canvas Sliding Canopy, Steel Tray, Tint, XRS 370c,100L Water,
17 PX2 XLT Supercab Manual, Sync3, 2" Lift,Summit Bullbar, Fyrlyt 5000's, ARB 140l Tank, Versus Creed 17x8.5, 285x70x17 KM2, Safari Snorkel, Black Duck Seat Covers, Ozki Canvas Sliding Canopy, Steel Tray, Tint, XRS 370c,100L Water,
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
Transmission temp works spot on in OBD link, but not in Torque.
Config is the same as preloaded in torque, but I get this....
Sent from my SM-G930F using Tapatalk
Config is the same as preloaded in torque, but I get this....
Sent from my SM-G930F using Tapatalk
Dennis - 2016 Everest Titanium
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Try and keep it to one thread please or stuff gets spread everywhere. I have responded to your post in the other thread.HiroboFreak wrote: ↑Fri Aug 25, 2017 7:51 am Transmission temp works spot on in OBD link, but not in Torque.
Config is the same as preloaded in torque, but I get this....
Sent from my SM-G930F using Tapatalk
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
Is the tyre temp PID correct?
Mine is reading 101°
Sent from my SM-G930F using Tapatalk
Mine is reading 101°
Sent from my SM-G930F using Tapatalk
Dennis - 2016 Everest Titanium
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
TorqueHiroboFreak wrote: ↑Wed Aug 30, 2017 4:35 pm Is the tyre temp PID correct?
Mine is reading 101°
Sent from my SM-G930F using Tapatalk
Name: Tyre Temp
PID: 22280B
Min Value: 0
Max Value: 255
Header: 726
Equation: G-40
Works perfect for me.
Don't just read the math, look at the gauge. After the test mine can back as G=54 which is correct -40 and 12 degrees is what my gauge shows. Yes it's cold right about now.
Figures will be up and down due to reading one tyre at a time.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
If you get nothing or weird temps go for a drive. The sensors turn off so you will only get the last known reading.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
Yeah I took it for a drive around the block and it didn't change
Maybe Everest is different??
I put °F in the Unit field.
Sent from my SM-G930F using Tapatalk
Maybe Everest is different??
I put °F in the Unit field.
Sent from my SM-G930F using Tapatalk
Dennis - 2016 Everest Titanium
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Same BCM, same sensors. There is no difference. Take screen shot of settings.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
Screenshot of settingssaeb wrote:Same BCM, same sensors. There is no difference. Take screen shot of settings.
Sent from my SM-G930F using Tapatalk
Dennis - 2016 Everest Titanium
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Try deleting the unit type. I do not use is generally.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
That gave me a reading of 215°
Sent from my SM-G930F using Tapatalk
Sent from my SM-G930F using Tapatalk
Dennis - 2016 Everest Titanium
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Why are you using Torque over ODBlink?
Are you using Red or Black dongle? I find Red dongle so inconsistent with Torque but with OBDlink it connects every time and everything just works.
Are you using Red or Black dongle? I find Red dongle so inconsistent with Torque but with OBDlink it connects every time and everything just works.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
Black dongle.
I found the opposite with OBD link failing to connect, stating passcode doesn't match, forcing me to unpair and pair again.
Strange, since OBD Link is made specifically for that dongle.
Torque on the other hand connects every time, plus I like the grid when setting up dashboards etc and I'm more familiar with Torque now.
Sent from my SM-G930F using Tapatalk
I found the opposite with OBD link failing to connect, stating passcode doesn't match, forcing me to unpair and pair again.
Strange, since OBD Link is made specifically for that dongle.
Torque on the other hand connects every time, plus I like the grid when setting up dashboards etc and I'm more familiar with Torque now.
Sent from my SM-G930F using Tapatalk
Dennis - 2016 Everest Titanium
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
I assume use have use Celsius ticked in settings/units?
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
Yes
Sent from my SM-G930F using Tapatalk
Sent from my SM-G930F using Tapatalk
Dennis - 2016 Everest Titanium
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Seems you have some weird things going on with your Torque install.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
So my settings all look correct then?
I'm normally good with this stuff so I'm confused and frustrated right now.
Sent from my SM-G930F using Tapatalk
I'm normally good with this stuff so I'm confused and frustrated right now.
Sent from my SM-G930F using Tapatalk
Dennis - 2016 Everest Titanium
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Will pm you a zip file later with CSV file inside. I will include a couple of custom PIDS starting with Saeb. Import the custom list and see what happens.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 83
- Joined: Mon Jul 03, 2017 8:47 pm
- Location: Brisbane
- Model Of Vehicle: EVEREST TREND UA
- Year Of Vehicle: 2016
- Has thanked: 7 times
- Been thanked: 4 times
One more question: what are the PID's "diesel aftertreatment status", "DPF regen status", and "DPF regen type" supposed to show?
They constantly show zeroes on a digital displays.
They constantly show zeroes on a digital displays.
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Where did you get these from, what are they showing zero in?
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic