Does anyone know where the voilet power wire from the cargo lights goes to ?
Was hoping to splice into it inside the cab somewhere ??
Cheers
Sent from my iPhone using Tapatalk
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Cargo lights
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
The rollbar puddle lamp lights?
They will go to the BCM, pull cover off, right knee drivers seat. Where the fuses are is the BCM.
They will go to the BCM, pull cover off, right knee drivers seat. Where the fuses are is the BCM.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 7
- Joined: Mon Mar 04, 2019 5:48 pm
- Location: Hunter valley
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
Hey Stewert, yeah that would be them!
Would they have there own fuse in there that I could just run an add a fuse ?
Cheers Jesse
Would they have there own fuse in there that I could just run an add a fuse ?
Cheers Jesse
Cheers Jesse
Fx4 owner
Fx4 owner
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
No fuse, they are electronically fused. You will need to find the feed wire from the BCM.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 7
- Joined: Mon Mar 04, 2019 5:48 pm
- Location: Hunter valley
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
Thanks for that, what about the interior lights?
Do they have a fuse or is it the same situation? Cheers
Sent from my iPhone using Tapatalk
Do they have a fuse or is it the same situation? Cheers
Sent from my iPhone using Tapatalk
Cheers Jesse
Fx4 owner
Fx4 owner
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
From memory the same. Look in the owners manual, if the fuse if not listed then it is run off FETS. Pretty sure all lighting is FETS.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 7
- Joined: Mon Mar 04, 2019 5:48 pm
- Location: Hunter valley
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
You are right, seems to be no fuse for that circuit.
Assuming it’s controlled by the back
And protected by fets as you said.
Would you know if there is anywhere in the eng bay to splice into the interior lighting and or sports bar circuit ?
Ive found a wire in the drivers side a pillar which will work but now wondering if there is anything in the eng bay (closer to the relay).
Thanks
Sent from my iPhone using Tapatalk
Assuming it’s controlled by the back
And protected by fets as you said.
Would you know if there is anywhere in the eng bay to splice into the interior lighting and or sports bar circuit ?
Ive found a wire in the drivers side a pillar which will work but now wondering if there is anything in the eng bay (closer to the relay).
Thanks
Sent from my iPhone using Tapatalk
Cheers Jesse
Fx4 owner
Fx4 owner
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
All lighting is directly connected to the BCM only.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic