Ranger Mods

Does anyone know where the voilet power wire from the cargo lights goes to ?
Was hoping to splice into it inside the cab somewhere ??
Cheers


Sent from my iPhone using Tapatalk

The rollbar puddle lamp lights?

They will go to the BCM, pull cover off, right knee drivers seat. Where the fuses are is the BCM.

Hey Stewert, yeah that would be them!
Would they have there own fuse in there that I could just run an add a fuse ?
Cheers Jesse

Jesselear wrote: ↑Sat Sep 25, 2021 2:12 pm Hey Stewert, yeah that would be them!
Would they have there own fuse in there that I could just run an add a fuse ?
Cheers Jesse

No fuse, they are electronically fused. You will need to find the feed wire from the BCM.

Thanks for that, what about the interior lights?
Do they have a fuse or is it the same situation? Cheers


Sent from my iPhone using Tapatalk

From memory the same. Look in the owners manual, if the fuse if not listed then it is run off FETS. Pretty sure all lighting is FETS.

You are right, seems to be no fuse for that circuit.
Assuming it’s controlled by the back
And protected by fets as you said.
Would you know if there is anywhere in the eng bay to splice into the interior lighting and or sports bar circuit ?
Ive found a wire in the drivers side a pillar which will work but now wondering if there is anything in the eng bay (closer to the relay).
Thanks


Sent from my iPhone using Tapatalk

All lighting is directly connected to the BCM only.