Got this on my dash today while driving around 60 zone. Would appear for about 30 secs then gone. Didn’t get it on highway but acceleration on the ramp seemed odd at about 100km (going to 110km zone).
Once off highway started to get it pop up again.
Plugged in for scan and saved the codes. I think a lot of these were already there so I’m not sure what to take away from this.
Attached codes
Thoughts? I have a planned drive from syd to Melb and back next Friday so hopefully not major issue.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Powertrain light
-
- Donator
- Posts: 235
- Joined: Tue Nov 07, 2017 8:46 pm
- Location: Queensand
- Model Of Vehicle: RANGER XLT PX
- Year Of Vehicle: 2016
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 18 times
- Been thanked: 28 times
I would clear the codes and see what comes back.
2016 XLT 4x4 Space cab, Aluminium Tray, Ford Steel Bull bar. Rear bumper bar fitted for parking sensors.
- GenieMan
- Donator
- Posts: 61
- Joined: Thu Sep 29, 2022 10:09 pm
- Location: Australia
- Model Of Vehicle: RANGER XL PX2
- Year Of Vehicle: 2015
- Has thanked: 12 times
- Been thanked: 1 time
Will try this and write back here. Anything specific I should look for?
I know some of those codes are going to come back instantly, such as the climate related ones as my car did not come with dual zone but has dual zone sync 3
- GenieMan
- Donator
- Posts: 61
- Joined: Thu Sep 29, 2022 10:09 pm
- Location: Australia
- Model Of Vehicle: RANGER XL PX2
- Year Of Vehicle: 2015
- Has thanked: 12 times
- Been thanked: 1 time
Just combing through now but here are the DTCs before and after. (after I cleared)
- Attachments
-
- dtc before drive.txt
- (3.48 KiB) Not downloaded yet
- dtc before drive.txt
- (3.48 KiB) Not downloaded yet
-
- dtc after drive.txt
- (6.09 KiB) Downloaded 4 times
- dtc after drive.txt
- (6.09 KiB) Downloaded 4 times
- GenieMan
- Donator
- Posts: 61
- Joined: Thu Sep 29, 2022 10:09 pm
- Location: Australia
- Model Of Vehicle: RANGER XL PX2
- Year Of Vehicle: 2015
- Has thanked: 12 times
- Been thanked: 1 time
I think it might be:
===PCM DTC P040D:00-2C===
Code: P040D - EGR Temperature Sensor A Circuit High
Status:
- DTC Maturing - Intermittent at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Powertrain Control Module
===END PCM DTC P040D:00-2C===
As the glow plug codes I'm pretty sure were there since I got the car. And the rest of the codes seem to just be modules that my car does not have, which makes sense.
Does this sound correct?
===PCM DTC P040D:00-2C===
Code: P040D - EGR Temperature Sensor A Circuit High
Status:
- DTC Maturing - Intermittent at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Powertrain Control Module
===END PCM DTC P040D:00-2C===
As the glow plug codes I'm pretty sure were there since I got the car. And the rest of the codes seem to just be modules that my car does not have, which makes sense.
Does this sound correct?
- GenieMan
- Donator
- Posts: 61
- Joined: Thu Sep 29, 2022 10:09 pm
- Location: Australia
- Model Of Vehicle: RANGER XL PX2
- Year Of Vehicle: 2015
- Has thanked: 12 times
- Been thanked: 1 time
Oops I didn't realise I was searching my thread instead of the whole forum.
Guessing its this: viewtopic.php?t=1553
Guessing its this: viewtopic.php?t=1553
-
- Donator
- Posts: 235
- Joined: Tue Nov 07, 2017 8:46 pm
- Location: Queensand
- Model Of Vehicle: RANGER XLT PX
- Year Of Vehicle: 2016
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 18 times
- Been thanked: 28 times
I dont know if the egr fault will cause the spanner warning, but it is in the PCM faults list and probably should be fixed anyway.
There are a lot of faults with possible causes as short or open circuit. It would be worth check all battery cables and earths. There may be a common cause for those,
There are a lot of faults with possible causes as short or open circuit. It would be worth check all battery cables and earths. There may be a common cause for those,
2016 XLT 4x4 Space cab, Aluminium Tray, Ford Steel Bull bar. Rear bumper bar fitted for parking sensors.
- GenieMan
- Donator
- Posts: 61
- Joined: Thu Sep 29, 2022 10:09 pm
- Location: Australia
- Model Of Vehicle: RANGER XL PX2
- Year Of Vehicle: 2015
- Has thanked: 12 times
- Been thanked: 1 time
I’ll have a look around, thanks.Bala1 wrote: ↑Sat Jan 14, 2023 6:09 pm I dont know if the egr fault will cause the spanner warning, but it is in the PCM faults list and probably should be fixed anyway.
There are a lot of faults with possible causes as short or open circuit. It would be worth check all battery cables and earths. There may be a common cause for those,
I think most of those are missing modules. Since my Ranger is an XL, but I’ve got Sync 3 and the dual screen IPC, they are probably both expecting a lot of stuff that was the car they came out of. I’ll have to work with the forums here to disable as much as I can to get rid of those codes, assuming they aren’t because of a bad earth.
Here is the breakdown of the codes that I have and what I think is the reason why. Hopefully Saeb see's this and can impose his wisdom.
===PCM DTC P0671:00-6C===
Code: P0671 - Cylinder 1 Glow Plug Circuit / Open
Module: Powertrain Control Module
Unsure
===PCM DTC P0672:00-6C===
Code: P0672 - Cylinder 2 Glow Plug Circuit / Open
Module: Powertrain Control Module
Unsure
===PCM DTC P0673:00-6C===
Code: P0673 - Cylinder 3 Glow Plug Circuit / Open
Module: Powertrain Control Module
Unsure
===PCM DTC P0674:00-6C===
Code: P0674 - Cylinder 4 Glow Plug Circuit / Open
Module: Powertrain Control Module
Unsure
===PCM DTC P040D:00-2C===
Code: P040D - EGR Temperature Sensor A Circuit High
Module: Powertrain Control Module
I think this is the cause of my Spanner warning. Going to buy the sensor on Monday anyway since its not that expensive and I need to be ready for Friday.
===APIM DTC B119F:13-0B===
Code: B119F - GPS Antenna
Module: Accessory Protocol Interface Module
I assume this is related to me having upgraded to Sync 3
===APIM DTC U0159:00-0B===
Code: U0159 - Lost Communication With Parking Assist Control Module A
Module: Accessory Protocol Interface Module
My car does not have sensors
===BdyCM DTC B12C2:15-48===
Code: B12C2 - Puddle Lamp
Module: Body Control Module
My car does not have the puddle lamps
===FCIM DTC B105A:14-0A===
Code: B105A - Cabin Temperature Sensor Fan
Module: Front Controls Interface Module
I assume this is due to Sync 3 upgrade
===FCIM DTC B11E5:15-0A===
Code: B11E5 - Left HVAC Damper Position Sensor
Module: Front Controls Interface Module
I assume this is due to Sync 3 upgrade
===FCIM DTC B1A61:15-0A===
Code: B1A61 - Cabin Temperature Sensor
Module: Front Controls Interface Module
I assume this is due to Sync 3 upgrade
===FCIM DTC B1A63:15-0A===
Code: B1A63 - Right Solar Sensor
Module: Front Controls Interface Module
I assume this is due to Sync 3 upgrade
===FCIM DTC B1A64:15-0A===
Code: B1A64 - Left Solar Sensor
Module: Front Controls Interface Module
I assume this is due to Sync 3 upgrade
===TRM DTC B1488:08-2F===
Code: B1488 - Retractable Tow Bar System
Module: Trailer Module
My car does not have this
===TRM DTC U0121:00-2F===
Code: U0121 - Lost Communication With Anti-Lock Brake System (ABS) Control Module A
Module: Trailer Module
I don't believe my car has this
===TRM DTC U2100:00-2F===
Code: U2100 - Initial Configuration Not Complete
Module: Trailer Module
If this is talking about Trailer Module, I don't think I have this
===IPC DTC U023A:00-0A===
Code: U023A - Lost Communication With Image Processing Module A
Module: Instrument Panel Control Module
Not sure exactly what this is talking about, my cluster has been swapped to the Dual Screen version, perhaps that is the problem?
- GenieMan
- Donator
- Posts: 61
- Joined: Thu Sep 29, 2022 10:09 pm
- Location: Australia
- Model Of Vehicle: RANGER XL PX2
- Year Of Vehicle: 2015
- Has thanked: 12 times
- Been thanked: 1 time
Looks like that sensor from the other thread was my issue. Swapped this morning and so far, have not gotten that error again.
Now just gotta figure out what else I need to disable to get rid of the rest of these codes.
Now just gotta figure out what else I need to disable to get rid of the rest of these codes.
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
GenieMan wrote: ↑Sat Jan 14, 2023 6:28 pmBala1 wrote: ↑Sat Jan 14, 2023 6:09 pm I dont know if the egr fault will cause the spanner warning, but it is in the PCM faults list and probably should be fixed anyway.
There are a lot of faults with possible causes as short or open circuit. It would be worth check all battery cables and earths. There may be a common cause for those,
SEE NOTES IN RED BELOW.
Vehicle is most likely running an early engine calibration and as such glow plugs 1 to 4 are not good. Unless you live in a cold climate then I wouldn't replace. Otherwise replace and have Ford update the engine calibration.
===PCM DTC P0671:00-6C===
Code: P0671 - Cylinder 1 Glow Plug Circuit / Open
Module: Powertrain Control Module
Unsure
===PCM DTC P0672:00-6C===
Code: P0672 - Cylinder 2 Glow Plug Circuit / Open
Module: Powertrain Control Module
Unsure
===PCM DTC P0673:00-6C===
Code: P0673 - Cylinder 3 Glow Plug Circuit / Open
Module: Powertrain Control Module
Unsure
===PCM DTC P0674:00-6C===
Code: P0674 - Cylinder 4 Glow Plug Circuit / Open
Module: Powertrain Control Module
Unsure
Replace exhaust manifold EGR sensor.
===PCM DTC P040D:00-2C===
Code: P040D - EGR Temperature Sensor A Circuit High
Module: Powertrain Control Module
I think this is the cause of my Spanner warning. Going to buy the sensor on Monday anyway since its not that expensive and I need to be ready for Friday.
You have a cheap antenna, some are better than other but DTC can generally be ignored if GPS is working.
===APIM DTC B119F:13-0B===
Code: B119F - GPS Antenna
Module: Accessory Protocol Interface Module
I assume this is related to me having upgraded to Sync 3
You have not disabled parking sensors in the Sync 3 you purchased
===APIM DTC U0159:00-0B===
Code: U0159 - Lost Communication With Parking Assist Control Module A
Module: Accessory Protocol Interface Module
My car does not have sensors
You will see a change in BCM non asbuilt that I had put in, it will be in brackets and have reference to (puddle Lamps)
===BdyCM DTC B12C2:15-48===
Code: B12C2 - Puddle Lamp
Module: Body Control Module
My car does not have the puddle lamps
You do not have the fan, nor auto climate and you have replaced the FCIM because of the Sync3, from memory you will be stuck with this DTC.
===FCIM DTC B105A:14-0A===
Code: B105A - Cabin Temperature Sensor Fan
Module: Front Controls Interface Module
As above
I assume this is due to Sync 3 upgrade
===FCIM DTC B11E5:15-0A===
Code: B11E5 - Left HVAC Damper Position Sensor
Module: Front Controls Interface Module
I assume this is due to Sync 3 upgrade
As above
===FCIM DTC B1A61:15-0A===
Code: B1A61 - Cabin Temperature Sensor
Module: Front Controls Interface Module
I assume this is due to Sync 3 upgrade
As above
===FCIM DTC B1A63:15-0A===
Code: B1A63 - Right Solar Sensor
Module: Front Controls Interface Module
I assume this is due to Sync 3 upgrade
As above
===FCIM DTC B1A64:15-0A===
Code: B1A64 - Left Solar Sensor
Module: Front Controls Interface Module
I assume this is due to Sync 3 upgrade
There is an incorrect asbuit change in the TRM
===TRM DTC B1488:08-2F===
Code: B1488 - Retractable Tow Bar System
Module: Trailer Module
My car does not have this
There is an incorrect asbuit change in the TRM or trailer sway is turned on in the replacement cluster
===TRM DTC U0121:00-2F===
Code: U0121 - Lost Communication With Anti-Lock Brake System (ABS) Control Module A
Module: Trailer Module
I don't believe my car has this
Ignore it
===TRM DTC U2100:00-2F===
Code: U2100 - Initial Configuration Not Complete
Module: Trailer Module
You must have it or the module would not show up with DTCs
If this is talking about Trailer Module, I don't think I have this
Disable forward or front camera in IPC non asbuilt ( I cannot remember the wording
===IPC DTC U023A:00-0A===
Code: U023A - Lost Communication With Image Processing Module A
Module: Instrument Panel Control Module
Not sure exactly what this is talking about, my cluster has been swapped to the Dual Screen version, perhaps that is the problem?
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic