Does someone know what temps these run at idle pre turbo?
I have nearly completed my list of hidden PIDS, so far I'm at 197 undocumented PIDs, so want to try and track down the elusive manifold EGT PID if one exists from this list.
I plan to have this list completed by tomorrow afternoon then will select certain PIDs based on calculations that will hopefully make finding it easier.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Missing EGT PID - Require exhaust temp from manifold please
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Have spend another 20 hours on this all up and I think I may have found it although I do have a huge headache now though.
Graphing and response looks good in the driveway from idle to some throttle so will give it a run on the way to work tomorrow and see what happens.
Graphing and response looks good in the driveway from idle to some throttle so will give it a run on the way to work tomorrow and see what happens.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- GerryP
- Moderator
- Posts: 514
- Joined: Sun May 21, 2017 8:17 pm
- Location: Karoonda SA
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 58 times
- Been thanked: 82 times
Sounds promising Stewart... well done mate!
As far as temp's go pre turbo, I don't know, but I would expect 150 to maybe 200 degrees higher than post turbo around town and possibly 300 higher if pushing it hard. Only going by what I've been told previously, so it will be interesting to see what you get.
Cheers
As far as temp's go pre turbo, I don't know, but I would expect 150 to maybe 200 degrees higher than post turbo around town and possibly 300 higher if pushing it hard. Only going by what I've been told previously, so it will be interesting to see what you get.
Cheers
Gerry
'17 Ford Ranger PX2 XLT Supercab
Manual, Canopy, Flares, ROH Assassins, Smartbar Stealth, Solar & Dual Battery
'17 Ford Ranger PX2 XLT Supercab
Manual, Canopy, Flares, ROH Assassins, Smartbar Stealth, Solar & Dual Battery
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
What is your post turbo Gerry?GerryP wrote: ↑Tue Mar 06, 2018 11:29 pm Sounds promising Stewart... well done mate!
As far as temp's go pre turbo, I don't know, but I would expect 150 to maybe 200 degrees higher than post turbo around town and possibly 300 higher if pushing it hard. Only going by what I've been told previously, so it will be interesting to see what you get.
Cheers
May make you up a scangauge code to try so you can compare side by side?
Sent you a PM
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- GerryP
- Moderator
- Posts: 514
- Joined: Sun May 21, 2017 8:17 pm
- Location: Karoonda SA
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 58 times
- Been thanked: 82 times
Can do no prob's. EGT obviously changes with load and ranges from around 250 - 350 normal driving and up to 450 towing uphill. I did have it at 500 once, but that's unusual and pushing hard.
Gerry
'17 Ford Ranger PX2 XLT Supercab
Manual, Canopy, Flares, ROH Assassins, Smartbar Stealth, Solar & Dual Battery
'17 Ford Ranger PX2 XLT Supercab
Manual, Canopy, Flares, ROH Assassins, Smartbar Stealth, Solar & Dual Battery
-
- New Member
- Posts: 2
- Joined: Fri Apr 27, 2018 11:53 am
- Location: Melbourne
- Model Of Vehicle: RANGER XL PX2
- Year Of Vehicle: 2017
Hi Guys,
I am looking to monitor my EGT's also and log them prior to doing an exhaust change so that I can compare temps before and after. Hints on where to find PIDS for EGT's and Lambda would be great. TIA.
I am looking to monitor my EGT's also and log them prior to doing an exhaust change so that I can compare temps before and after. Hints on where to find PIDS for EGT's and Lambda would be great. TIA.
2017 PX2 LIFTED LOCKED AND LOTS OF FUEL
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
You won't get lambda as there is no lambda sensor.
What hardware or software do you want to use to monitor the PIDS? As all are listed in there appropriate sections on the board.
On a side note, I still have to monitor all the unlisted PIDS I have found and try and translate them to see if the manifold EGT PID can be found or if it even has one. Its a long and painstaking process with reading, converting hex then graphing in excel. Also it could be 1 byte or 2 bytes which makes it more difficult.
What hardware or software do you want to use to monitor the PIDS? As all are listed in there appropriate sections on the board.
On a side note, I still have to monitor all the unlisted PIDS I have found and try and translate them to see if the manifold EGT PID can be found or if it even has one. Its a long and painstaking process with reading, converting hex then graphing in excel. Also it could be 1 byte or 2 bytes which makes it more difficult.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Complete PCM PID list viewtopic.php?f=14&t=183 There are PIDs for each module but that should get you started.
I have know idea what format the Motec requires, headers, length, etc. so cannot advise any further without that information.
I have know idea what format the Motec requires, headers, length, etc. so cannot advise any further without that information.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic