Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
DPF Regen Gauge - PX3 only
-
- Junior Member
- Posts: 31
- Joined: Wed Aug 07, 2019 3:19 pm
- Location: SA
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2019
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 4 times
- Been thanked: 7 times
The DPF soot (pid from this forum) seems to agree with this display on my biturbo. The exhaust filter gauge on the display rounds down to increments of 5% whereas the DPS soot in ODBlink goes up 1% at a time, but otherwise they have the same number.
Blue, Shiny, and stock biturbo
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
-
- New Member
- Posts: 3
- Joined: Tue Feb 19, 2019 7:21 am
- Location: Sunshine Coast
- Model Of Vehicle: RANGER XLT PX
- Year Of Vehicle: 2014
- Has thanked: 1 time
Doing a mates 2litre bi turbo Wildtrack. Would the Everest setting be the one to use because it has the same motor?
Everest 720-07-02 xBxx-xxxx
Everest 720-07-02 xBxx-xxxx
2014 PX XLT Dual Cab Metro Grey 4x4
-
- Junior Member
- Posts: 31
- Joined: Wed Aug 07, 2019 3:19 pm
- Location: SA
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2019
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 4 times
- Been thanked: 7 times
No it's the XLT value as posted earlier in the thread.
Blue, Shiny, and stock biturbo
- Evert
- Junior Member
- Posts: 72
- Joined: Sun Jul 14, 2019 7:17 am
- Location: somewhere in the land of Oz
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2019
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 1 time
- Been thanked: 8 times
Hi guys and gals. I tried this on my XLT PX3 Ranger, but it didn't work.
IPC asbuilt
720-07-02
factory setting was: 0260 40D2
I changed this to: 0960 40D2
I didn't get the DPF gauge and I also lost the intelligent 4wd display.
I just re-read the initial post again. Since my initial value was 2 and I add 8, I should change it to A. Correct?
IPC asbuilt
720-07-02
factory setting was: 0260 40D2
I changed this to: 0960 40D2
I didn't get the DPF gauge and I also lost the intelligent 4wd display.
I just re-read the initial post again. Since my initial value was 2 and I add 8, I should change it to A. Correct?
PX3 XLT Ranger (3.2l manual)
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Your asbuilt is non standard as an a Ranger never came with I4WD gauge.
As per the instructions - "Take the initial value eg. 3 and in windows calc or other changed to programmer mode, select hex and add 8 to your start value, the new character is what you will use."
Hex 2 plus 8 = A and not 9
xAxx-xxxx
As per the instructions - "Take the initial value eg. 3 and in windows calc or other changed to programmer mode, select hex and add 8 to your start value, the new character is what you will use."
Hex 2 plus 8 = A and not 9
xAxx-xxxx
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- Evert
- Junior Member
- Posts: 72
- Joined: Sun Jul 14, 2019 7:17 am
- Location: somewhere in the land of Oz
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2019
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 1 time
- Been thanked: 8 times
Thanks Stewart, I’ll try that tonight
PX3 XLT Ranger (3.2l manual)
-
- Donator
- Posts: 7
- Joined: Wed May 15, 2019 11:08 am
- Location: Australia
- Model Of Vehicle: EVEREST AMBIENTE UA
- Year Of Vehicle: 2018
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Has thanked: 4 times
- Been thanked: 2 times
I tried this one on my 2019 Everest ambiente and the DPF % appeared in right cluster but it throws up this error when ignition is turned on - "front camera not present. service required"saeb wrote: ↑Sun Oct 06, 2019 4:04 pm DPF Regen Gauge - PX3 only
XL,XLS 720-07-02 x8xx-xxxx
XLT 720-07-02 x9xx-xxxx
Everest 720-07-02 xBxx-xxxx
If you want to confirm the change is correct.
Take the initial value eg. 3 and in windows calc or other changed to programmer mode, select hex and add 8 to your start value, the new character is what you will use.
Gauge can be found in Driver Assist/DPF Status
20191006_155751.jpg
any ideas Stewart?
Ambient 2018
Perth WA
Perth WA
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
You have made an incorrect change on your calculation. Send me your saved IPC abt and will fix.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- New Member
- Posts: 4
- Joined: Tue Jun 18, 2019 11:06 pm
- Location: Sydney
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2019
Hi all
Did this on my 3.2 XLT today and had to use the XLS change not that XLT as listed as my initial value was 0000-4078 so I changed it to 0800-4078 as per the guidance to add 8 hex.
XL,XLS 720-07-02 x8xx-xxxx
XLT 720-07-02 x9xx-xxxx
Everest 720-07-02 xBxx-xxxx
Just an FYI. Maybe because mine is a very early PX3 XLT? Not sure. Anyway thanks for the additional note to check the +8. Works a treat.
Andy
Did this on my 3.2 XLT today and had to use the XLS change not that XLT as listed as my initial value was 0000-4078 so I changed it to 0800-4078 as per the guidance to add 8 hex.
XL,XLS 720-07-02 x8xx-xxxx
XLT 720-07-02 x9xx-xxxx
Everest 720-07-02 xBxx-xxxx
Just an FYI. Maybe because mine is a very early PX3 XLT? Not sure. Anyway thanks for the additional note to check the +8. Works a treat.
Andy
-
- Donator
- Posts: 7
- Joined: Wed May 15, 2019 11:08 am
- Location: Australia
- Model Of Vehicle: EVEREST AMBIENTE UA
- Year Of Vehicle: 2018
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Has thanked: 4 times
- Been thanked: 2 times
Hi Stewart
attached ipc.abt as requested.
Thanks for your help, much appreciated.
Cheers
ted thompson
Ambient 2018
Perth WA
Perth WA
-
- New Member
- Posts: 4
- Joined: Tue Jun 18, 2019 11:06 pm
- Location: Sydney
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2019
Update:
Just noticed since doing this the clock on my left screen shows “--:--“.
Clock on the Sync 3 centre screen in functioning as normal.
Any ideas/link? Should that 8 actually be a 9?
Thanks
Andy
Just noticed since doing this the clock on my left screen shows “--:--“.
Clock on the Sync 3 centre screen in functioning as normal.
Any ideas/link? Should that 8 actually be a 9?
Thanks
Andy
wrxmy99 wrote: ↑Fri Jul 31, 2020 2:27 pm Hi all
Did this on my 3.2 XLT today and had to use the XLS change not that XLT as listed as my initial value was 0000-4078 so I changed it to 0800-4078 as per the guidance to add 8 hex.
XL,XLS 720-07-02 x8xx-xxxx
XLT 720-07-02 x9xx-xxxx
Everest 720-07-02 xBxx-xxxx
Just an FYI. Maybe because mine is a very early PX3 XLT? Not sure. Anyway thanks for the additional note to check the +8. Works a treat.
Andy
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Change Sync 3 time up and down an hour.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
I have only made the one change to B, you had a 2 for some reason.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- New Member
- Posts: 4
- Joined: Tue Jun 18, 2019 11:06 pm
- Location: Sydney
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2019
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Your vehicle most likely has different options enabled. That change will affect about 6 other options.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 7
- Joined: Wed May 15, 2019 11:08 am
- Location: Australia
- Model Of Vehicle: EVEREST AMBIENTE UA
- Year Of Vehicle: 2018
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Has thanked: 4 times
- Been thanked: 2 times
Hi Stewart
For some reason this file won't load, throws up an error. I have restored previously from backup ABTs but this one won't play nice.
Regards Ted
Ambient 2018
Perth WA
Perth WA
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Are you using the latest version of Forscan?
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 13
- Joined: Sat Nov 30, 2019 10:07 am
- Location: Samsun
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2019
- Forscan Dongle Type: ELM327 with switch
- Has thanked: 3 times
- Been thanked: 1 time
Working my 19 ranger xlt , but my front camera enabled too and off road guage gone ,shows front camera eror after i disabled it no problem thanks
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
-
- Donator
- Posts: 7
- Joined: Wed May 15, 2019 11:08 am
- Location: Australia
- Model Of Vehicle: EVEREST AMBIENTE UA
- Year Of Vehicle: 2018
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Has thanked: 4 times
- Been thanked: 2 times
all good, just had to disable front camera ( i dont have one) to get rid of the error.
Ambient 2018
Perth WA
Perth WA